Aaronia AG IsoLOG Mobile 9060
Handheld 3D Antenna 9 kHz - 6 GHz
- Frequency Range: 9 kHz to 6 GHz
- Design: 3D (Isotropic)
- Nominal impedance: 50 Ohm
- Frequency Range: 9 kHz to 6 GHz
- Design: 3D (Isotropic)
- Nominal impedance: 50 Ohm
- VSWR: <1:2.5 (typ.)
- Gain: up to 10dBi
- RF connection: N (female)
- 650mAh LiPo re-chargeable battery
- Battery run time: 6 hours
- Ultra fast adjustable "chopper" function
- Interface: USB 2.0
- Dimensions (L/W/D): 340 x 75 x 75 mm
- Weight: 350g
- For use with any Spectrum Analyzer brand
Applications:
- Unwanted Surveillance Signals
- Tetra/BOS
- ISM434
- LTE800
- ISM868
- GSM900
- GSM1800
- GSM1900
- DECT
- UMTS
- WLAN
- Microwave
- Bluetooth
- WiFi
- LTE2.6
- WiMAX
- 5GHz WLAN
- PAR Radar
- Directional Radio
The Aaronia IsoLOG Mobile 9060 Handheld 3D Antenna 9kHz - 6GHz is an ultra light and small isotropic antenna which is compatible with any spectrum analyzer as a perfect plug and play solution for 3D measurements in limited time frames. The antenna requires no software installation, no power connection, and no hardware changes. It is connectable via the N (male) connector to any analyzer or oscilloscope.
The IsoLog Mobile 9060 includes an internal, rechargeable battery, offering a run-time of 6 hours, and a switchable low noise bypass preamplifier. The integrated amp allows measurements of very low-powered signals. Thus, used in bypass mode, the antenna is still usable for high field-strengths. The control of the antenna is done via USB or via manual antenna selection mode, requiring no USB connection.
This model also has an integrated ultra fast adjustable "chopper" function. Using special, glitch-free RF switches, this feature offers an automatic endless antenna rotation/selection with a switching duration of up to 50kHz. This feature transforms the IsoLOG Mobile 9060 into a fully functional 3D antenna without the need of any USB software control.
Country of Origin | Germany |
---|---|
Brand | Aaronia |
Condition | NEW |
Replacement | ISOLOGMOBILE9060PRO |
- 1 - Waterproof and shockproof carrying case
- 1 - Model PGT Pistol grip with minature-tripod function
- 1 - Installed 650mAh LiPo Battery
- 1 - Battery charger / power supply
- 1 - SMA to N Adapter for the connection of SMA cables