Aaronia AG Real-Time EMC Bundle 3
Near-Field and Far-Field, with Spectran V6 RSA500X Spectrum Analyzer, HyperLOG 6080, BicoLOG 20100E Antennas, PBS2 Probe Set
REALTIMEEMCBUNDLE3
Real-Time EMC Bundle 3
104/007
Aaronia AG Real-Time EMC Bundle 3
Near-Field and Far-Field, with Spectran V6 RSA500X Spectrum Analyzer, HyperLOG 6080, BicoLOG 20100E Antennas, PBS2 Probe Set
REALTIMEEMCBUNDLE3
Real-Time EMC Bundle 3
104/007
The Aaronia REALTIMEEMCBUNDLE3 enables EMC diagnostics in a completely new way, even during product design. For example, shielding problems can be localized and the success of countermeasures can be analyzed in real time. This significantly reduces the time and thus also the financial effort in product development.
- SPECTRAN V6 RSA500X
- Frequency range: 10MHz to 6GHz
- Unlimited continuous 245MHz true I/Q streaming up to 2xUSB 3.0
- SPECTRAN V6 RSA500X
- Frequency range: 10MHz to 6GHz
- Unlimited continuous 245MHz true I/Q streaming up to 2xUSB 3.0
- Dual receiver real-time bandwidth of 245MHz (2x124MHz)
- Sweep 6GHz in less than 5mS (1THz/s)
- Speed: 500 GHz/s
- I/Os: 1 Rx and 1 Tx
- 80 MHz/optional 120 MHz/245 MHz I/Q
- DANL (internal pre-amp on) Typ. -170 dBm/Hz3
- Parallel measurement of several frequency bands
- Dual USB true I/Q streaming up to 784MBytes/s
- I/Q vector signal generator bandwidth of up to 120MHz (seamless streaming)
- POI 97 ns (FFT-based), 10ns (direct I/Q-based)
- Exceptional dynamic range through use of 16-bit ADC with 2GSPS (Giga Samples per Second)
- Sample rate: 500 MSPS (16 Bit Dual 256 MSPS I/Q-Data)
- FPGA: 930GMAC/s
- FFT rate: 960 million FFT points/s (120 million FFTs/s)
- Stackable accessories
- Light and compact
- Includes software RTSA-Suite PRO with daily updates
- Many ways to display and analyze any received or recorded data
- HyperLOG 6080
- Design: LPDA
- Active: No
- Maximum Gain: 6 dBi
- Connector: SMA (female)
- Mount: 1/4" Thread
- Only single broadband antenna for complete frequency range from 680 MHz up to 8 GHz
- Optimal for usage with spectrum analyzers for EMC measurement
- Incl. high-tech radome with modern, appealing design
- Freely alignable polarization
- Calibration data can be saved to IC on antennas and also be read back
- Excellent forward/backward ratio
- Excellent symmetry of radiation patterns
- Integrated 1/4" tripod socket
- Suitable for mobile use
- Suitable for outdoor installation
- Directional
- Robust design
- Splash water proof
- Small weight and dimensions
- Made in Germany
- BicoLOG 20100E
- Special EMC version with optimized antenna gain
- Design: Biconical
- Frequency range: 20MHz - 1GHz
- Gain (typ.): -38dBi to 1dBi
- Dimensions (L/W/D): 540 x 225 x 225mm (21.2 x 8.9 x 8.9 in.)
- Weight: 1150gr (2.5 lbs)
- Antenna factor: 17-31dB/m
- RF connection: SMA socket (18GHz) or N socket using adapters
- Calibration points: 196 (5MHz steps)
- Max. transmission power: 1W (30dBm or 0dbW)
- Nominal impedance: 50 Ohms
- Tripod connection: 1/4 in.
- Optimal for usage with spectrum analyzers for EMC measurement
- Suitable for mobile use
- Robust design
- PBS2 Active Probe Set
- Frequency range: DC(1 Hz) - 9 GHz
- Design: Passive H and E field probes
- Nominal impedance: 50 Ohm
- Pre-Amplifier: UBBV2 (40dB, 1 kHz to 10 GHz)
- Pre-Amplifier noise: 3.5dB typical
- Pre-Amplifier type/gain: "linear" falloff. 1 MHz: 40dB; 3 GHz: 37.5dB; 6 GHz: 35dB
- Dimensions of case (L/W/D): (300x190x70) mm
- Weight (case incl. probes): 1500gr
- Tripod connection: 1/4 in.
- Covered with insulating layer
- Typical standard calibration data and Excel sheet for dBm to V/m and A/m conversion (on CD)
- Isotropic E-field probe: 3mm sensor diameter, 9 GHz maximum resonance frequency, 50 Ohms SMB socket (m) connector
- 50mm magnetic field probe: 50mm sensor diameter, 700 MHz maximum resonance frequency, 50 Ohms SMB socket (m) connector
- 6mm magnetic field probe: 6mm sensor diameter, >6 GHz Maximum resonance frequency, 50 Ohms SMB socket (m) connector
- 12mm magnetic field sniffer: 12mm sensor diameter, 2.6 GHz maximum resonance frequency, 50 Ohms SMB socket (m) connector
- 25mm magnetic field probe: 25mm sensor diameter, 500 MHz maximum resonance frequency, 50 Ohms SMB socket (m) connector
- Compatible with any Spectrum Analyzer or Measurement Receiver
- Applications:
- Pinpointing interference sources
- Estimation of interference field strength
- Verification of shielding and filtering measures
- Identifying faulty components
- Detecting circuitry overly sensitive to interference
The Aaronia AG Real-Time EMC Bundle 3 enables EMC diagnostics in a completely new way, even during product design. For example, shielding problems can be localized and the success of countermeasures can be analyzed in real time. This significantly reduces the time and thus also the financial effort in product development. Based on a completely new method of spectrum analysis, Aaronia measurement devices enable RF and EMC real-time measurement at a spectacular price.
With a real-time bandwidth of min. 80MHz, unrivaled in its class, finding even extremely short duration interfering signals and their cause is no longer a problem. The determination of frequency and signal strength as well as the simultaneous display of several limit values significantly increases the speed of the measurement. Thus, Aaronia spectrum analyzers contribute decisively to the timely and EMC-compliant development of new products. All SPECTRANs and all antennas are developed, individually manufactured and calibrated at Aaronia in Germany. This guarantees the highest quality standards. Another highlight is the associated RTSA-Suite PRO software, which uses new, innovative and patented procedures that significantly improve the workflow and evaluation of your measurement data.
| Brand | Aaronia |
|---|---|
| Catalog | 104/007 |
| Condition | NEW |
| Vendor Alias | AR 104/007 |
- 1 - SPECTRAN V6 RSA500X in a Box
- 1 - HyperLOG 6080 in a Case
- 1 - BicoLOG 20100E in a Case
- 1 - PBS2 Active Probe Set with 5 Probes in Case
- 1 - Accessories Kit
