Additel ADT918-M
Pneumatic Pressure Test Pump, 1,500 psi, M20X1.5 (F) - Air
ADT918M
ADT918-M
Additel ADT918-M
Pneumatic Pressure Test Pump, 1,500 psi, M20X1.5 (F) - Air
ADT918M
ADT918-M
- Brand Name: Additel
- Condition: NEW
- Generated pressure range: 95% vacuum to 1,500 psi (100 bar) positive pressure
- Portable: Only 5.7 lb (2.6 kg)
- Adjustment resolution: 0.001 psi (10 Pa , 0.1 mbar)
- High-quality screw press for fine pressure adjustment
- Specially designed shut-off valve makes pressure as stable as possible during calibration
- Built-in gas-liquid isolator protects pump from moisture and dirt
- Pressurized to desired pressure by lever directly and make fine adjustment, no high-pressurized valve needed
- Hand-tight quick connectors allow easy connecting and disconnecting to test pump without need for PTFE tape or wrenches
- Media: Air
- Material:
- Ram/adapters: SS
- Body: SS, aluminum
- Seals: Buna-N, FTM, PTFE, Copper Alloy
- Pressure port type: M20X1.5 female
- Piston volume: 27 ml (1.6 in3)
- Height: 5.5 in. (140 mm)
- Base: 12.4 in. (315 mm) x 7.8 in. (198 mm)
- Warranty: 1 year
The Additel ADT918M Pneumatic Pressure Test Pump, 1,500 psi, M20X1.5 (F) - Air is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500 psi (100 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The ADT918-M can be special ordered to comply with oxygen free applications. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT918-M is an ideal comparison test pump for pressure instruments calibration.
| Brand | Additel |
|---|---|
| Condition | NEW |
| Vendor Alias | ADT918-M |
- 20 - O-rings
- 1 - Manual
