Additel ADT919A-B

High Pressure Pneumatic Test Pump, 2,000 psi, 1/4 BSP (F) - Air

ADT919AB
ADT919A-B

Additel ADT919A-B

High Pressure Pneumatic Test Pump, 2,000 psi, 1/4 BSP (F) - Air

ADT919AB
ADT919A-B
  • Brand Name: Additel
  • Condition: NEW
This product is available for shipping to the US, Canada, and Puerto Rico only.
$4,477.00
This item ships FREE
  • Generated pressure range: 95% vacuum to 2,000 psi (140 bar) positive pressure
  • High efficiency: Generate 2,000 psi (140 bar) in 30 seconds
  • Adjustment resolution: 0.001 psi (10 Pa , 0.1 mbar)
  • High-quality screw press for fine pressure adjustment
  • Specially designed shut-off valve makes pressure as stable as possible during calibration
  • Built-in gas-liquid isolator protects pump from moisture and dirt
  • Residual liquid in pump introduced from devices under test will be collected and then pushed out and collected during pressure release
  • Anticorrosive and wear resistant material are used to improve the reliability further
  • Hand-tight quick connectors allow easy connecting and disconnecting to test pump without need for PTFE tape or wrenches
  • Media: Air
  • Material:
    • Ram/adapters: SS
    • Body: SS, aluminum
    • Seals: Buna-N, PTFE, Copper Alloy
  • Pressure port type: 1/4 BSP female
  • Piston volume: 60 ml (3.7 in3)
  • Height: 7.00 in. (178 mm)
  • Base: 21.26 in. (540 mm) x 10.63 in. (270 mm)
  • Weight: 14.3 lb (6.5 kg)
  • Warranty: 1 year

The Additel ADT919AB High Pressure Test Pump, 2,000 psi, 1/4 BSP (F) - Air is a hand operated pressure pump designed to generate pressure from 95% vacuum to 2,000 psi (140 bar). With a long lever, it just takes 30 seconds to reach 2,000 psi (140 bar). A high-quality screw press is designed for fine pressure adjustment, with an ad justment resolution up to 0.001 psi (10 Pa , 0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from the devices under test will be collected and then pushed out during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT919A-B is an ideal comparison test pump for pressure instruments calibration.

More Information
BrandAdditel
ConditionNEW
Vendor AliasADT919A-B
  • 20 - O-rings
  • 1 - Manual