Additel ADT920HV-N2-SET
High Pressure Pneumatic Test Pump with Carrying Case, High Volume, 3,000 psi, 1/2 NPT (F) - Air
Additel ADT920HV-N2-SET
High Pressure Pneumatic Test Pump with Carrying Case, High Volume, 3,000 psi, 1/2 NPT (F) - Air
- Brand Name: Additel
- Condition: NEW
- Generated pressure range: 95% vacuum to 3,000 psi (200 bar) positive pressure
- High efficiency: Generate 3,000 psi (200 bar) in 40 seconds
- Adjustment resolution: 0.001 psi (10 Pa, 0.1 mbar)
- High-quality screw press for fine pressure adjustment
- Specially designed shut-off valve makes pressure as stable as possible during calibration
- Built-in gas-liquid isolator protects pump from moisture and dirt
- Residual liquid in pump introduced from devices under test will be collected and then pushed out and collected during pressure release
- Anticorrosive and wear resistant material are used to improve the reliability further
- Hand-tight quick connectors allow easy connecting and disconnecting to test pump without need for PTFE tape or wrenches
- Media: Air
- Material:
- Ram/adapters: SS
- Body: SS, aluminum
- Seals: Buna-N, F357, PTFE, Copper Alloy
- Pressure port type: 1/2 NPT female
- Piston volume: 115 ml (7.02 in3 )
- Height: 7.00 in. (178 mm)
- Base: 21.26 in. (540 mm) x 10.63 in. (270 mm)
- Weight: 15.9 lb (7.2kg)
- Warranty: 1 year
- Includes carrying case
The Additel ADT920HVN2SET High Pressure Test Pump with Carrying Case, High Volume, 3,000 psi, 1/2 NPT (F) - Air are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000 psi (200 bar). With a long lever, it takes just 40 seconds to reach 3,000 psi (200 bar). The high volume (HV) model has been outifitted with a higher volume pump to provide added capacity. A quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT920HV-N2-SET is an ideal comparison test pump for pressure instruments calibration.
Brand | Additel |
---|---|
Condition | NEW |
Vendor Alias | ADT920HV-N2-SET |
- 20 - O-rings
- 1 - Manual
- 1 - Carrying Case