AEMC 2620
AC Leakage Current Probe with 4.4 in. Jaw, 4A and 400A Ranges, 1 mV/mA and 1 mV/A Output
AEMC 2620
AC Leakage Current Probe with 4.4 in. Jaw, 4A and 400A Ranges, 1 mV/mA and 1 mV/A Output
The AEMC 2620 (2125.52) AC Leakage Current Probe measures leakage current shunted to ground caused by insulation faults. This probe enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting.
- Measurement Ranges: 4A, 400A
- Current Range: 500 uA to 4A, 500 mA to 400A
- Jaw Opening: 4.4 in.
- Safety Rating: EN 61010-2-032, 600V CAT III
- Measures leakage current shunted to ground caused by insulation faults
- Checks for leakage, locates insulation breakdowns on live circuits
- Very high sensitivity
- Large inside 4.4 in. jaw diameter allows use on large/multiple conductors
- Two switch-selectable measurement ranges
- Works with single-, dual-, three-phase systems
- Connects directly to digital multimeters on mV/VAC range
- Output leads are terminated with standard 4 mm banana plugs capable of interfacing with any standard multimeter
- Measurement Ranges: 4A, 400A
- Current Range: 500 uA to 4A, 500 mA to 400A
- Output Signal: 1 mV/mA (4V max.), 1 mV/A (400 mV max.)
- Load Impedance: 1 megohm min.
- Frequency Range: 48 to 1000 Hz
- Jaw Opening: 4.4 in.
- Maximum Conductor Size: 4.4 in.
- Safety Rating: EN 61010-2-032, 600V CAT III
The AEMC 2620 (2125.52) AC Leakage Current Probe measures leakage current shunted to ground caused by insulation faults. This probe enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting.
The AEMC 2620 (2125.52) AC Leakage Current Probe is designed specifically for locating low current faults on high current loads. The detector is a sensitive nickel alloy AC current transformer capable of measuring differential or leakage current as low as 500 microamps and may be used to measure current up to 400 amps continuous duty.
The AEMC 2620 (2125.52) AC Leakage Current Probe provides two output ranges of 1 millivolt/milliamp AC or 1 millivolt/amp AC. The output leads are terminated with standard 4 millimeter banana plugs capable of interfacing with any standard multimeter. With the 4 inch jaw opening and range of 500 microamps to 200 amps, the Model 2620 provides a versatile way to analyze unbalanced current measurements, leakage values on grounding conductors, and ground loop currents.
Country of Origin | France |
---|---|
Brand | AEMC |
Condition | NEW |
- 1 - Model 2620 AC Leakage Current Probe (2125.52)
- 1 - User Manual