AEMC 3000-24-2-1

AmpFlex Flexible AC Current Sensor Probe, 300/3000A, 10 mV/1 mV/A, 24 in.

30002421
3000-24-2-1

AEMC 3000-24-2-1

AmpFlex Flexible AC Current Sensor Probe, 300/3000A, 10 mV/1 mV/A, 24 in.

30002421
3000-24-2-1

The AEMC 3000-24-2-1 (2113.05) AmpFlex Flexible AC Current Sensor Probe is an AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used such as tight spaces, cable bundles, wide or large bus bars, or irregular shapes.

  • Current Range: 300/3000A
  • Output Signal: 10 mV/1 mV/A
  • Sensor Length: 24 in.
  • Sensor Diameter: 8 in.
$426.55 Price $449.00
This item ships FREE
  • Enables TRMS measurements when connected to TRMS instrument
  • No core saturation/damage if overloaded
  • Overrange LED for measurement circuitry
  • Waterproof sensor
  • Shape memory function for custom pre-shaping of sensor before use, no drooping
  • Very high frequency response
  • Low phase shift for power measurements
  • Insensitive to DC, measures only AC component on DC + AC signals
  • Excellent linearity
  • Lightweight design
  • 9V alkaline battery provides typical 150 hour continuous operation
  • EN 61010, 1000V CAT III rating for sensor
  • EN 61010, 600V CAT III rating for module
Applications
  • Measuring around wide bus bars
  • Measuring crowded circuit breaker panels
  • Measuring around large cable bundles
  • Measuring in any traditional application
  • Measuring around irregular shapes
Specifications
  • Current Range: 300/3000A
  • Measurement Range: 5 to 3000A
  • Output Signal: 10 mV/1 mV/A
  • Accuracy: 1% of reading
  • Frequency Range: 10 to 20000 Hz
  • Water/Dustproof Rating: IP45 (sensor), IP40 (module)
  • Maximum Conductor Size: 7.64 in.
  • Sensor Length: 24 in.
  • Sensor Diameter: 8 in.

The AEMC 3000-24-2-1 (2113.05) AmpFlex Flexible AC Current Sensor Probe is an AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, this unit can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The 'shape memory' feature enables the user to 'pre-shape' the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors that require reaching around the conductor to complete the loop.

The AEMC 3000-24-2-1 (2113.05) AmpFlex Flexible AC Current Sensor Probe is lightweight and does not use magnetic cores like standard transformers. The transformation principle is instead based on an air core. This presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current overloads. The sensor assembly is waterproof and insulated for working voltage up to 1000 volts.

The AEMC 3000-24-2-1 (2113.05) AmpFlex Flexible AC Current Sensor Probe has a millivolt output proportional to the current measured for direct readings on digital multimeters, loggers, oscilloscopes, and power or harmonic meters.

More Information
Country of OriginUnited States
BrandAEMC
ConditionNEW
  • 1 - AmpFlex Flexible AC Current Sensor Probe, 24 in. (3000-24-2-1)