AEMC K100
AC/DC MicroProbe for Digital Multimeters/Oscilloscopes, Lead Termination, 4.5A, 1 mV/mA, 0.18 in.
K100
K100
AEMC K100
AC/DC MicroProbe for Digital Multimeters/Oscilloscopes, Lead Termination, 4.5A, 1 mV/mA, 0.18 in.
K100
K100
The AEMC K100 (1200.67) AC/DC MicroProbe measures as low as 200 microamps for AC or 100 microamps for DC on Digital Multimeters or Oscilloscopes (not included). The unit has proportional millivolt output for direct readings and features a compact size that requires no clamping for applications. No range or mode switching is required for use.
- Outputs signal proportional to total current (DC + AC)
- Resolution: 100 uA typical (DC), 200 uA typical (AC)
- Compatibility: Digital Multimeters/Oscilloscopes
- Measures extremely low level DC from 100 uA
- Outputs signal proportional to total current (DC + AC)
- Low noise
- Ultra-compact size, non-contact clamp-on convenience
- Simple plug-in operation
- Accurate display of waveforms
- No range/mode (AC/DC) switching required
- Extended battery life
- Red LED indicates momentary/continuous overload
- Green LED indicates power/battery condition
- Current Range: 0 to +/- 4.5ADC, 0 to 3Arms, 0 to 2A Peak
- Output Signal: 1 mV/mA
- Resolution: 100 uA typical (DC), 200 uA typical (AC)
- Output Noise: Less than 100 uV, DC to 3 kHz
The AEMC K100 (1200.67) AC/DC MicroProbe is designed for use with Digital Multimeters or Oscilloscopes (not included). This unit measures as low as 200 microamps for AC or 100 microamps for DC. The unit has proportional millivolt output for direct readings on digital multimeters, loggers, and oscilloscopes.
The ultra-compact size allows for the convenience of no clamping required for applications. No range or mode switching is required for use.
| Country of Origin | United States |
|---|---|
| Brand | AEMC |
| Condition | NEW |
- 1 - Electronic Plug-In Module with Attached Current Probe
- 1 - 9V Battery, Installed
- 1 - User Manual
