AEMC K110
AC/DC MicroProbe for Digital Multimeters/Oscilloscopes, Lead Termination, 450 mA, 10 mV/mA, 0.18 in.
K110
K110
AEMC K110
AC/DC MicroProbe for Digital Multimeters/Oscilloscopes, Lead Termination, 450 mA, 10 mV/mA, 0.18 in.
K110
K110
The AEMC K110 (2111.73) AC/DC MicroProbe measures as low as 150 microamps AC or 50 microamps DC on Digital Multimeters or Oscilloscopes (not included). The unit has proportional millivolt output for direct readings and features a compact size that requires no clamping for applications. The high accuracy is ideal for calibration of current loop instruments.
- Outputs signal proportional to total current (DC + AC)
- Resolution: 50 uA typical (DC), 150 uA typical (AC)
- Compatibility: Digital Multimeters/Oscilloscopes
- Measures extremely low level DC from 100 uA
- Outputs signal proportional to total current (DC + AC)
- Low noise
- Ideal for calibration of current loop process instruments
- Ultra-compact size, non-contact clamp-on convenience
- Simple plug-in operation
- Accurate display of waveforms
- No range/mode (AC/DC) switching required
- Extended battery life
- Red LED indicates momentary/continuous overload
- Green LED indicates power/battery condition
- Current Range: 0 to +/- 450mADC, 0 to 300mArms, 0 to 200 mA Peak
- Output Signal: 10 mV/mA
- Resolution: 50 uA typical (DC), 150 uA typical (AC)
- Output Noise: Less than 100 uV, DC to 3 kHz
The AEMC K110 (2111.73) AC/DC MicroProbe is designed for use with Digital Multimeters or Oscilloscopes (not included). This unit measures as low as 150 microamps for AC or 50 microamps for DC. The unit has proportional millivolt output for direct readings on digital multimeters. The high accuracy of the unit is ideal for calibration of current loop process instruments.
The ultra-compact size allows for the convenience of no clamping required for applications. No range or mode switching is required for use.
| Country of Origin | United States |
|---|---|
| Brand | AEMC |
| Condition | NEW |
- 1 - Electronic Plug-In Module with Attached Current Probe
- 1 - 9V Battery, Installed
- 1 - User Manual
