AEMC OX 5042B w/MN379T KIT
40 MHz, 2-Channel, 50 MS/s Handscope Portable Oscilloscope with MN379T AC Probe/3000-24-1-1 MiniFlex Sensor
AEMC OX 5042B w/MN379T KIT
40 MHz, 2-Channel, 50 MS/s Handscope Portable Oscilloscope with MN379T AC Probe/3000-24-1-1 MiniFlex Sensor
The AEMC OX 5042 w/MN379T Kit (2150.23) Handscope Portable Oscilloscope Kit features a 3-in-1 instrument offering the capabilities of an Oscilloscope, Multimeter, and Power Harmonic Analyzer. Both the MN379T and 3000-24-1-1 offer measurements in hard-to-reach places with their 10 foot leads.
- Includes MN379T AC Current Probe/3000-24-1-1 MiniFlex Sensor
- Bandwidth: 40 MHz
- Number of Channels: 2
- Sample Rate: 2 GS/s (ETS mode), 50 MS/s (one-shot mode)
Handscope Portable Oscilloscope (OX 5042B)
- 3-in-1 instrument includes functions of 40 MHz Oscilloscope, double 8000-count TRMS Multimeter/Power Analyzer, Harmonic Analyzer
- Two fully isolated channels
- Displays voltage/current measurements simultaneously
- Auto-scaling
- Records up to 2700 measurements
- Stores up to 100 screenshots able to be recalled to display
- 3.5 in. color LCD screen with LED back-lighting
- Integrated interactive multilingual help function
- 2 MB recording data storage
- Communication via isolated USB SCPI protocol
- Compact size offers one-handed operation
- IP54 rated for dust/water-resistance
- Bandwidth: 40 MHz
- Number of Channels: 2
- Sample Rate: 2 GS/s (ETS mode), 50 MS/s (one-shot mode)
- Vertical Resolution: 9 bits
- Memory Depth: 2500 points per channel
- Voltage Range: 600 mV to 600Vrms, 800 mV to 800VDC
- Multi-Channel Analysis: 2 channels up to 31st harmonic fundamental frequency from 40 to 450 Hz
- Safety/EMC: IEC61010-1 Ed. 3 600V CAT III (safety), EN61000-3, 2001/EN61326-1, 2006 (EMC)
AC Current Probe (MN379T)
- Small, compact size
- True-RMS measurements
- Large jaw opening accommodates conductor sizes up to 250 MCM
- 10 ft. lead allows measurements in hard-to-reach areas
- Nominal Range: 5A/100A
- Measurement Range: 0.005A to 6A, 0.1A to 120A
- Frequency Range: 40 Hz to 10 kHz
- Jaw Opening: 0.83 in.
- Max. Conductor Size: 0.78 in.
- Electrical: EN 61010-2-32
MiniFlex AC Flexible Current Sensor (MF 3000-24-1-1)
- True-RMS measurements
- 10 ft. leads allow measurements in hard-to-reach areas
- No core saturation/damage if measured circuit is overloaded
- Low phase shift for power measurements
- Insensitive to DC, only measures AC component on DC + AC signals
- Excellent linearity
- 9V Alkaline battery typically provides 150 hours of continuous operation
- Range: 3000A
- Signal Output: 1 mV/A
- Frequency Range: 10 Hz to 20 kHz with current derating
- Sensor Diameter: 0.2 in.
- Sensor Length: 24 in.
- Max. Conductor Size: 8 in.
- Connection Cable Length: 10 ft.
- Safety Rating: EN 61010, 1000V CAT III, 600V CAT IV
The AEMC OX 5042 w/MN379T Kit (2150.23) Handscope Portable Oscilloscope Kit offers a compact, shock-proof, IP54 rated, 3-in-1 Handscope that can be comfortably held in one hand. The Handscope is an ergonomically designed instrument equipped with a 3.5 inch color screen with LED back-lighting for a precise and crisp data display. Integrated multilingual help screens are available at all times to make it simpler to use.
The OX 5042B (2150.21) combines three measuring instruments in one-- an Oscilloscope, Multimeter, and Power and Harmonic Analyzer. The Oscilloscope features two fully isolated channels with a 40 megahertz bandwidth and vertical sensitivity of 5 millivolts to 200 volts/div. The Multimeter features two fully isolated channels with an 8000-count display and power measurement capabilities. The Power and Harmonic Analyzer features two fully isolated channels and performs up to the 31st harmonic with fundamental frequency from 40 hertz to 450 hertz.
For recording data, 2 megabytes of storage is available. Within the multimeter mode, the user can store graphic recordings of 2700 measurements from 5 minutes to 1 month. Communication is conducted via isolated USB SCPI protocol which makes it simple to program the instrument remotely with the supplied SX-METRO software. This unit has been developed using an Eco-Design approach to reduce the environmental impact of it.
The AEMC OX 5042 w/MN379T Kit (2150.23) includes the MN379T AC Current Probe along with the 3000-24-1-1 MiniFlex AC Flexible Current Sensor for additional applications. The MN379T features a small, compact size suited for True-RMS measurements along with a 40 hertz to 10 kilohertz response. The large jaw opening accommodates conductor sizes up to 250 thousand circle mils and the 10 foot lead allows for measurements in hard-to-reach areas. The 3000-24-1-1 is suited for True-RMS measurements and measures 24 inches in length with a 10 foot lead for conducting measurements in hard-to-reach areas. Featuring a low phase shift for power measurements, this sensor also protects the core from saturation or damage if the measured circuit is overloaded.
Country of Origin | France |
---|---|
Brand | AEMC |
Catalog | 2150.23 |
Condition | NEW |
UPC | 685338240290 |
Vendor Alias | 2150.23 |
- 1 - OX 5042B Handscope Portable Oscilloscope (2150.21)
- 1 - Field Case
- 1 - US Wall Plug
- 1 - USB Cable
- 1 - Pair of Color-Coded Leads, Red/Black, 10 ft.
- 1 - Pair of Color-Coded Alligator Clips, Red/Black
- 1 - Pair of Color-Coded Probes, Red/Black
- 1 - BNC Adapter
- 1 - BNC Male Probe, 10:1 600V
- 1 - MN379T AC Current Probe (2153.02)
- 1 - MF 3000-24-1-1 MiniFlex AC Flexible Current Sensor, 24 in. (2132.63)
- 6 - NiMH Rechargeable Batteries, 1.2V
- 1 - USB Cable and Driver
- 1 - Quick-Start Guide
- 1 - Software USB Drive