Armada Technologies Pro50K
Digital AC/DC Solenoid Activator with Multimeter Kit with Filter Probe
PRO50K
Pro50K
Armada Technologies Pro50K
Digital AC/DC Solenoid Activator with Multimeter Kit with Filter Probe
PRO50K
Pro50K
The Armada Technologies PRO50K Digital AC/DC Solenoid Activator with Multimeter Kit with Filter Probe offers a digital capability allowing it to test AC, DC, high resistance, and any low voltage solenoid out there. This model offers a digital LCD screen and a built-in digital multimeter; it can also test for all low voltage solenoids.
- Includes PRO210F Tone Probe
- Connections: Removable Standard Multimeter Alligator Leads
- Includes PRO210F Tone Probe
- Connections: Removable Standard Multimeter Alligator Leads (24 inch, Red and Black. Cat IV, 600V)
- Tone tracing transmit power: +6 dBm (600 ohms)
- Line transmit frequency: 900 Hz alternating with 1050 Hz, at a 2 Hz rate
- Line voltage protection: 120VAC or 120VDC
- Battery type: Four (4) 'AA' or LR6 cells
- AC Solenoid Operation 24 volts AC
- DC Latching Solenoid Operation +9 volt DC and -9 volt DC pulses 40 milliseconds
- Test Range 3,000 feet (1 km) over 18 gauage (1 mm) cable
- Built-in Multimeter Tests AC or DC to 40 volts, auto-ranging
- Electrical resistance from 0 to 40 kilohms, auto-ranging
- Display 0.5 x 2 inches (12 x 50 mm) LCD
- Battery saving Timeout - 30 minutes
- Operating Conditions +32 to +120 degrees F (0 to +50 degrees C)
- Unit Size 7 x 3 x 1.5 inches (175 x 80 x 35 mm)
- Weight including test leads 8.5 ounces (240 g) without batteries
Applications:
- Testing 24v output from the clock/controller
- Activating any AC or DC Low Voltage Solenoid
- Chattering any AC or DC Low Voltage Solenoid for lost valve locating
- Sending tone to identify wires
- Measuring AC or DC Voltage and Resistance
The Armada Technologies PRO50K Digital AC/DC Solenoid Activator with Multimeter Kit with Filter Probe offers a digital capability allowing it to test AC, DC, high resistance, and any low voltage solenoid out there. This model offers a digital LCD screen and a built-in digital multimeter. The Pro50 can not only do these tests as the old analog solenoid activators can, but it can do it for all low voltage solenoids, not just 20-60 ohm AC models. That means DC and high resistance solenoids for lightning protection can be tested, diagnosed, and operated/chattered, all from one tester. The Pro50's built in multimeter can test for AC, DC, and ohms and is voltage protected to 120 volts. This more detailed information, given by the multimeter, replace the "dumb" LED lights that have no flexibility or ability to interpret results like a multimeter does. The included PRO210F Advanced Wire Tracing Probe identifies wires and cables by tracing tones from the PRO50.
| Brand | Armada Tech |
|---|---|
| Condition | NEW |
| UPC | 644216101924 |
| Vendor Alias | PRO50K |
- 1 - PRO50 Digital AC/DC Solenoid Activator with Multimeter
- 1 - PRO210F Filter Probe
- 1 - Zippered Carry Case
