BESANTEK Corporation BST-MG08
Datalogging Heavy Duty Multi-Gas Leak Detector with Air Pump
BSTMG08
BST-MG08
BESANTEK Corporation BST-MG08
Datalogging Heavy Duty Multi-Gas Leak Detector with Air Pump
BSTMG08
BST-MG08
- Measuring Range: O2: 0~30.0 %vol, H2S: 0~100 ppm, CO: 0~1000 ppm, CH4: 0.00~5.00 %vol, LEL: 0~100 %LEL
- Resolution Ratio: O2: 0.1%vol, H2S: 1ppm, CO: 1ppm, CH4: 0.01%vol, LEL: 1%LEL
- Measuring Range: O2: 0~30.0 %vol, H2S: 0~100 ppm, CO: 0~1000 ppm, CH4: 0.00~5.00 %vol, LEL: 0~100 %LEL
- Resolution Ratio: O2: 0.1%vol, H2S: 1ppm, CO: 1ppm, CH4: 0.01%vol, LEL: 1%LEL
- Sensors: High quality catalytic sensor for CH4, LEL, Electrochemical sensor for O2, H2S, CO
- Support unit switch between %LEL-%CH4 for combustible gases and ppm-mg/m3 for toxic gases
- High and low alarm point and fully adjustable, as well as STEL and TWA alarms
- Audible Alarm: Buzzer with ≥85dB at 1m audible
- Visible Alarm: Flashing Red LED ≥20m visible
- Vibration Alarm
- External air sampling pump for gas leak detection
- Rugged ABS + PC case, heavy duty, crash resistant and anti-static (less than 10⁻⁹Ohm)
- Water resistant and dustproof (standard IP66/67)
- Intrinsically safe device and has authorized reports
- Continuous LCD large screen display with real time clock and status of battery
- Microcomputer circuit with intelligent function
- High capacity chip and 4 layers PCB board
- Battery type: 3.7V/1500mA
- Continuous working time ≥13 hours
- Rechargeable battery (charging time 4-5 hours)
- Low battery warning indicator
- USB interface
- Stainless steel belt clip
The BESANTEK BSTMG08 Datalogging Heavy Duty Multi-Gas Detector with Air Pump can be applied to underground coal mining, petrochemical industry, municipal, environmental protection and other spaces where multi gas may exist. The BST-MG08 can be used for detecting Methane (CH4) or Combustible Gas (LEL), Oxygen (O2), Carbon Monoxide (Co) and Hydrogen Sulfide (H2S) gases simultaneously. This model offers audible, visible, and vibration alarms with user-adjustable high and low alarm points.
| Country of Origin | China |
|---|---|
| Brand | Besantek |
| Condition | NEW |
| Vendor Alias | BST-MG08 |
- 1 - USB Cord
- 1 - Adapter
- 1 - Calibration Cap and Tube
- 1 - Belt Clip
- 1 - Leather Case
- 1 - Hanging Cord
- 1 - Carrying Case
- 1 - BST Software
- 1 - Air Pump
- 1 - User Manual
