BK Precision 4034
Dual-Channel High-Performance Programmable Pulse Generator with GPIB/RS-232 Interface, 0.1 Hz to 50 MHz
BK Precision 4034
Dual-Channel High-Performance Programmable Pulse Generator with GPIB/RS-232 Interface, 0.1 Hz to 50 MHz
The BK Precision 4034 Dual-Channel High-Performance Programmable Pulse Generator is designed for testing digital systems and circuits based on TTL, CMOS, or ECL technologies. Both channels offer full functionality and all parameters can be set independently.
- Channels: 2
- Frequency Range: 0.1 Hz to 50 MHz
- Interface: GPIB/RS-232, IEEE-488.2/SCPI compatible
- Operating Modes: Continuous/Triggered/Gated/Burst/External Width
- Repetition rate of 0.1 Hz to 50 MHz
- Flexible trigger modes of continuous, triggered (internal/external/manual), gated burst, external width
- Pulse width programmable from 10 ns to 10s
- Transition times (rise/fall times) variable from 6 ns to 100 ms
- Programmable delay/double pulse
- Predefined amplitude levels for ECL, TTL, CMOS signals
- Store up to 99 different test setups with auto-retention of last power down setup
- 10 Vpp into 50 ohms output
- Closed case calibration
- Programmable via GPIB/RS-232
- SCPI compatible
- Both channels offer full functionality
- All parameters such as pulse width/transition time can be set independently
- Synchronize both channels with simple push of button
- Saves benchtop space with one unit
- Automatic Test Equipment (ATE)
- Avionics/radar testing
- Switching power supply testing
- Characterization of active components
- Channels: 2
- Frequency Range: 0.1 Hz to 50 MHz
- Period Range (Single Pulse): 20 ns to 10s
- Period Range (Double Pulse): 40 ns to 10s
- Period Jitter: Less than 0.01% of setting + 20 ps on Period/Width/Delay
- Width Range: 10 ns to (Period - 10 ns)
- Width Double Pulse: +/-(0.5% of setting + 3 ns) for second pulse
- Delay Range: 0 ns to (Period - Width - 10 ns)
- Duty Cycle Range: 1% to 99%
- High Level Range: -9.90V to 10V into 50 ohms load
- Low Level Range: -10V to 9.90V into 50 ohms load
- Amplitude Range: 0.1V to 10V Vpp into 50 ohms load
- Output Resistance: 50 ohms
- Operating Modes: Continuous/Triggered/Gated/Burst/External Width
- Pulse Functions: Single/Double
- Transition Times Range: Less than 6 ns to 100 ms, variable
- Internal Trigger Range: 100 ns to 100s
- Trigger Input Minimum Width: 10 ns
- Trigger Input Maximum Rate: 50 MHz
- Trigger Input Range: Selectable from -10V to 10V
- Interface: GPIB/RS-232, IEEE-488.2/SCPI compatible
- Memory: Non-volatile, stores up to 99 complete panel settings
The BK Precision 4034 Dual-Channel High-Performance Programmable Pulse Generator is a high-performance unit for testing digital systems and circuits based on TTL, CMOS, or ECL technologies. This instrument generates clean and accurate pulses up to 6 digits resolution with a repetition rate of up to 50 megahertz, variable pulse widths from 10 nanoseconds to 10 seconds, and pulse delays from 0 nanoseconds to 10 seconds. Output levels are adjustable from -10 volts to 10 volts with pulse amplitudes settable from 0.1 to 10 peak-to-peak voltage into a 50 ohms load.
The 4034 model features two channels in which both channels offer full functionality and all parameters such as pulse and transition time can be set independently. Both channels can be easily synchronized with the push of a button. By offering these features, this unit saves bench space from not needing multiple units or tools.
All parameters, modes, and functions are programmable via the front panel or remote control commands. Additionally, the pulse generator provides selectable complementary pulse and double pulse generation in continuous, triggered, gated, and counted burst modes.
Industry Leading Performance
External WidthIn the external width mode, pulse period and width are determined by an externally applied signal. The pulse generator then applies transition and level parameters to this signal in order to generate the pulse. This is ideal for power supply designers in which they can use this feature to shape the width and period of the output signal to drive the power supply's FET transistors while remaining synchronized with the control circuits.
Variable TransitionsFor added flexibility, variable rise and fall times can be programmed from 6 nanoseconds to 100 milliseconds. Various shapes of pulses can be obtained for applications where parameters such as linearity, switching times, or reflection times must be analyzed. Programmable rise and fall times can be used to measure operational amplifier slew rates and easily test thresholds of devices and circuits.
Straightforward User InterfaceThe BK Precision 4034 Dual-Channel High-Performance Programmable Pulse Generator uses a menu-driven front panel keypad and control knob to adjust all parameters. The bright, easy-to-read display shows all relevant parameters along with a graphical representation of the output pulse. If an entered parameter is not compatible with the existing setup status, the operator will be informed by an error message.
Users can conveniently select predefined amplitude levels for TTL, ECL, and CMOS signals along with the ability to choose a custom amplitude level for specialized applications.
Country of Origin | Israel |
---|---|
Brand | BK Precision |
Condition | NEW |
UPC | 817050403404 |
Vendor Alias | 4034 |
- 1 - Dual-Channel Pulse Generator (4034)
- 1 - RS-232 Cable
- 1 - AC Power Cord
- 1 - Certificate of Calibration
- 1 - Test Report
- 1 - User Manual