CCS Products CTBL-4.0x4.0-2000

Large Split-Core Current Transformer, 4.0 in. x 4.0 in. Opening, 2000A

CTBL40X402000
CTBL-4.0x4.0-2000

CCS Products CTBL-4.0x4.0-2000

Large Split-Core Current Transformer, 4.0 in. x 4.0 in. Opening, 2000A

CTBL40X402000
CTBL-4.0x4.0-2000
  • Current rating: 2000A
  • Window opening: 4.0 in. x 4.0 in.
  • Burden resistor built-in, 0.333 Vac (333 mVac) voltage output at rated full scale current, no shorting blocks needed
  • Current rating: 2000A
  • Window opening: 4.0 in. x 4.0 in.
  • Burden resistor built-in, 0.333 Vac (333 mVac) voltage output at rated full scale current, no shorting blocks needed
  • Accuracy ±1.5% from 10% to 100% of rated current
  • Line Frequency: 50 to 60 Hz
  • Output: voltage at rated amps: 0.33333 Vac
  • Core Material: silicon-iron
  • Phase angle 0.0 to 1.5 degrees leading from 20% to 100% of rated current
  • UL Listed 2808 (XOBA) for field installation in panels up to 600 Vac
  • Lead wires 8 ft. long, #18 AWG black and white, twisted-pair, MTW, UL 1015 600 Vac

The CCS Products CTBL-4.0x4.0-2000 Large Split-Core Current Transformer, 4.0 in. x 4.0 in. Opening, 2000A does not require shorting blocks because it contains an internal secondary burden resistor, so there is no possibility of high voltage on the secondary. The internal burden resistor converts the secondary current (mA) into a safe 0.333 Vac output. The full-scale rated current of the CTBL is determined during calibration by the internal burden resistor. CTBL CTs are intended for energy monitoring with accuracies of 1% of reading from 10% to 100% of rated current.

Bus-bar CTs are similar to split-core CTs, but are available with higher rated currents and larger window openings. They are typical installed on parallel phase conductors, and have a removable section, so that they can be installed without interrupting the electrical service.

More Information
BrandCCS Products
ConditionNEW
  • 1 - Bus Bar Current Transformer