CCS Products WNB-3D-480-P
WattNode Pulse Meter, Delta, 480 VAC Line to Line, Standard
WNB3D480P
WNB-3D-480-P
CCS Products WNB-3D-480-P
WattNode Pulse Meter, Delta, 480 VAC Line to Line, Standard
WNB3D480P
WNB-3D-480-P
- VAC line to line: 480
- Accuracy: 0.5% nominal
- Electrical service types: 3-Phase 3-Wire Delta 480V (No neutral), 3-Phase 4-Wire Wye 277/480V
Log in for member pricing
- VAC line to line: 480
- Accuracy: 0.5% nominal
- Electrical service types: 3-Phase 3-Wire Delta 480V (No neutral), 3-Phase 4-Wire Wye 277/480V
- Bidirectional watt-hour transducer
- Opto-isolated, 5000 volt rated solid state relay (dry contact rated 60 Vdc at 5 mA)
- Full-scale bidirectional pulse outputs standard 4.0 pulses per second resolution
- Pulse output: Compatible with energy management systems and data loggers
- Safe, low voltage (0.333 Vac) currenttransformers
- Line powered
- UL, cUL, CE, RoHS compliant
The CCS Products WNB-3D-480-P WattNode Pulse Meter, Delta, 480 VAC Line to Line, Standard is a true RMS AC watt-hour transducer with pulse output (solid state relay closure) proportional to kWh consumed or produced. The WattNode Pulse meter provides 0.5% accurate kWh measurements at low cost to meet needs for sub-metering, net-metering, energy management, and performance contracting applications.
The pulse outputs of WattNode meters are optically isolated to provide 5000 volts protection from the AC power lines. An optocoupler functions like mechanical on/off switch. The pulse recording device connected to the meter applies a small DC voltage to the optocoupler switch to determine if it is open or closed. Each opening and closing of the switch represents one pulse.
Diagnostic LEDs provide a per-phase indication of line voltage, positive energy (green flashing) and negative energy (red flashing) to help troubleshoot connection problems, like swapped CTs, or excessive line voltage.
| Brand | CCS Products |
|---|---|
| Condition | NEW |
| Vendor Alias | WNB-3D-480-P |
- 1 - Wattnode Pulse Meter
