CCS Products WNC-3D-400-FT10
Wattnode LonWorks Meter, 400 VAC Line to Line, Standard Model
CCS Products WNC-3D-400-FT10
Wattnode LonWorks Meter, 400 VAC Line to Line, Standard Model
- Brand Name: CCS Products
- Condition: NEW
- VAC line to line: 400
- Electrical service types: 3-Phase 3-Wire Delta 400V (No neutral), 3-Phase 4-Wire Wye 230/400V
- Measurements: Net Real Energy: kilowatt-hours (phase A, B, C, sum of all phases), Positive Real Energy: kilowatt-hours (phase A, B, C, sum of all phases), Bidirectional Real Power: Watts (phase A, B, C, and sum of all phases), Reactive Power: VARs (phase A, B, C, and sum of all phases), Power Factor: PF (phase A, B, C, all phases), Reactive Energy: kVAR-hours (sum of all phases), AC Frequency, RMS Voltage: (phase to neutral A, B, C), Computed RMS Current: (phase A, B, C), Demand kW, Peak Demand kW
- Meets accuracy requirements of ANSI C12.1 standard
- Supports LonWorks TP/FT-10 twisted-pair free topology network using Echelon's® LonTalk® (ANSI/CEA-709.1-B-2002) network protocol
- LonMark® 3.4 Certified
- Pluggable screw terminals for easy wiring
- True RMS power even with leading or lagging power factor and chopped or distorted waveforms
- Measure variable speed motor drives used in HVAC, refrigeration, and pumping systems
- Line powered
- Operating Voltage Range: -20% to +15% of the nominal rated voltage
- Power Line Frequency: 50 or 60 Hz
The CCS Products WNC-3D-400-FT10 Wattnode LonWorks Meter, 400 VAC Line to Line, Standard Model is a networked energy meter that measures both energy consumed and energy produced (bidirectional). It provides electrical measurements such as energy (kWh), power (kW), voltage, current, kW demand, kVAR, kVARh, power factor, line frequency, etc. These measurement values are communicated using the LonTalk® communication protocol as individual phase measurements and sum or average readings. Measurements are transmitted as Standard Network Variable Types (SNVTs) through a LonWorks gateway. The WattNode meter's compact size permits installation inside most electrical service panels, junction boxes, and OEM equipment. The WattNode LonWorks meter is line-powered and does not require a separate power source.
Brand | CCS Products |
---|---|
Condition | NEW |
Vendor Alias | WNC-3D-400-FT10 |
- 1 - Wattnode LonWorks Meter