Desco 50682
Chargebuster Overhead Ionizer, 2 Fan, No Adapter
The Desco 50682 Chargebuster Overhead Ionizer/2 Fan/No Adapter features a three-blade fan design for better coverage, a consistent balance, and a superior discharge time. The auto-feedback system consists of audible and visual alarms which will sound if the supply voltage drops and shut the unit down automatically.
- Auto-feedback system of audible/visual alarms
- Sealed plenum air flow
- 3-speed fan performance
- NIST calibrated
- Two 3 blade fan design with steady state DC ionization
- Allows for better coverage (2' x 4'), consistent balance ±10 Volts, and superior decay rate (<3 seconds)
- Auto-feedback system (audible and visual alarm through single tri-color LED)
- Unit will automatically shut down and alarm if/when supply voltage drops
- 120/220 VAC input voltage selectable
- Unit can be used with 110V or 220V power sources
- 3 position fan speed: Low, Medium, High
- Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
- Replaceable emitter pins allow for minimal downtime
The Desco 50682 Chargebuster Overhead Ionizer, 2 Fan, No Adapter is a steady-state DC ionizer designed for use in ESD protected areas. This model offers 2 fans with a 2' x 4' coverage area. The Chargebuster Overhead Ionizers' discharge times (< 3 seconds at 18") and low offset voltage (±10 volts) meet the required limits of ANSI/ESD S20.20 < ±35 volts tested per ANSI/ESD STM3.1 and ESD TR53. Its emitters are made of pure tungsten and spaced further apart to minimize ion recombination, increase discharge efficiency and provide a broader coverage area. The fans have 3 speeds (high, medium, low) which produce consistent performance at all 3 settings. The 50682 utilizes an auto-feedback system that continuously optimizes its performance and automatically alarms and shuts down should its supply voltage drop.
Brand | Desco |
---|---|
Condition | NEW |
Vendor Alias | 50682 |
- 1 - Hanging Kit
- 2 - Emitter Point Cleaners
- 1 - Certificate of Calibration