Desco 60505
High Output Benchtop Ionizer, 120VAC
60505
60505
Desco 60505
High Output Benchtop Ionizer, 120VAC
60505
60505
The Desco 60505 High Output Benchtop Ionizer (120V AC) features specially designed fan modules which create better coverage, consistent offset voltage, and superior discharge times. The sealed plenum air flow prevents contamination from being introduced to the workstation. The active balancing system continually adjusts the voltage output.
- 120/220V AC input voltage selectable
- 3-position fan speed performance
- Powder-coated housing
- NIST calibrated
- Benchtop steady state DC ionizer
- Specially designed fan modules create better coverage (16" x 24"), consistent offset voltage (balance) ±3 volts, and superior discharge times(<1 second at 12") tested per ANSI/ESD STM 3.1
- Sealed plenum air flow prevents contamination from being introduced to workstation
- Active balancing system with audible and visual alarm
- Continually adjusts voltage output for optimal performance and automatically alarms when maintenance is needed or unit is not operating correctly
- 120/220 VAC input voltage selectable
- Unit can be used with 110V or 220V power sources
- 3 Position Fan Speed: Low, Medium, High (50-100 CFM)
- Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
- Powder coated housing and multi-mount stand with sealed bearing fans
- Minimizes foreign objects debris, corrosion, and other contaminations when used in clean or sensitive areas
- Replaceable emitter pins allow for minimal downtime
- NIST Calibrated
The Desco 60505 High Output Benchtop Ionizer, 120VAC is a compact and lightweight steady state DC auto-balancing bench top worksurface ionizer with integrated closed-loop feedback. The unit is normally placed at one end of the workbench or area to be neutralized. It may also be mounted to a wall or shelf. The 60505's neutralization discharge time will be best approximately 12" to 48" directly in front of the unit and will increase as the distance from the unit increases. This model employs Steady State DC technology, which consists of separate negative and positive ion emitters connected by a pair of high-voltage cables to their respective high-voltage power supplies. The spacing between emitters varies depending on the design, and DC power is constantly applied to the emitter points. The ionizer uses feedback from the internal sensor grill to continuously adjust the output to maintain balance.
| Condition | NEW |
|---|---|
| Brand | Desco |
| Vendor Alias | 60505 |
- 1 - Power Cord, North America
- 1 - Emitter Point Cleaner Pack
- 1 - Certificate of Calibration
