Desco 94393
Ground Gard 5 Monitor with Buzzer and Switch, 120VAC
94393
94393
Desco 94393
Ground Gard 5 Monitor with Buzzer and Switch, 120VAC
94393
94393
The Desco 94393 Ground Gard 5 Monitor with Buzzer and Switch (120V AC) is a wrist strap and ground monitoring device for any electronics work station. This unit is designed to constantly monitor two single wire wrist straps using a Remote Operator Module for each user.
- Simple connection with RJ11 type telephone jack/ground wire
- Auto-switch design turns on automatically when banana is plugged in
- Remote jacks include 4 mm/7 mm park snaps
- Dual operator constant grounding monitor with remote modules
- Continuously monitors two operators at the same time
- Includes 2 modular remote jacks for operator connection
- Simple connection using RJ11 type telephone jack and ground wire
- Unique auto-switch design in remote turns on automatically when banana is plugged in
- Remote jacks include 4mm and 7mm park snaps
- Includes mat/ground sensing LED
- Monitors connection to mat/ground and electrical ground through the adapter
- Includes 120V adapter
The Desco 94393 Ground Gard 5 Monitor with Buzzer and Switch, 120VAC is a wrist strap and ground-monitoring device for the electronics workstation. When used correctly, it will provide a static safe and properly grounded work environment. It is designed to constantly monitor two capacitance type single wire wrist straps using a remote module for each user. A Ground Sense circuit with looping capability is also provided to constantly monitor the ground condition of bench tops, mats, wrist straps and the Ground Gard 5 unit itself. The 94393 will alarm if preset values are exceeded for capacitance, high resist and ground loss conditions. The grounding system is redundant and will still provide a limited grounding even if the utility ground is lost and the system is in an alarm state.
| Condition | NEW |
|---|---|
| Brand | Desco |
| Vendor Alias | 94393 |
- 2 - Remote Operator Module
- 1 - Power Adapter
- 2 - Remote Operator Cables
- 1 - Mat Ground Cord
- 1 - Push and Clinch Snap
- 2 - Velcro Strips
- 4 - Screws
- 1 - Certificate of Calibration
