DIGI-SENSE 89800-13
TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors, 115 VAC
DIGI-SENSE 89800-13
TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors, 115 VAC
The Digi-Sense WD-89800-13 is a Benchtop Temperature Controller with USB Output. The controller regulates a user-defined set point temperature. The Ramp and Soak feature allows up to a 40-step profile using time, hold, soak and end. It has an audible alarm, external alarm relay output, detachable power cord and grid support bracket.
- Simple on/off control to sophisticated auto-tuning PID control
- Program up to 9 ramp and soak profiles of up to 16 segments each
- Simple on/off control to sophisticated auto-tuning PID control
- Simultaneous view measured value and set point on two-line display
- Front panel indicates output and alarm conditions
- Grid support bracket ideal for fume hood mounting
- Free software offers remote computer control of system operations
- Program up to nine ramp and soak profiles of up to 16 segments each
- Calibration Accuracy: RTD and Types J, K, T, E, N: +/-0.1% of span
- Types B, R, S: +/-0.2% of span.
- Thermistor 0.4 of span ±0.7° F (0.5° c)
- Span equals: 1000° F (540° C) min.
The Digi-Sense TC9600 89800-13 Advanced Multiparameter Temperature Controller is designed to regulate a user-defined set point temperature. The Ramp and Soak feature allow up to a 40-step profile using; time, hold, soak and end. Which allows you to create the ideal profile for your process. The microprocessor control uses a PID algorithm that provides precise heating/cooling tolerances for demanding applications in the laboratory or industrial settings. Advanced features include a USB communication port, audible alarm, external alarm relay output, detachable power cord. and grid support bracket that is ideal for fume hood mounting to maximize bench space.
The 8980013 is a microprocessor-based, digital indicating, single-loop temperature controller. It has a single output located on the back of the controller. It features an auto-tuning function that allows automatic configuration of the PID parameters with minimum user configuration required. The 89800-13 has multiple inputs that accept thermocouple, RTD, and thermistor sensors.
The controller automatically sets the PID parameters through a "learning" sequence in the Tune mode. PID parameters include proportional band, reset/integral, and rate/derivative. The user-friendly LED display is to aid in monitoring and setup of the controller. The controller automatically store all user parameters in nonvolatile memory.
Brand | DIGI-SENSE |
---|---|
Condition | NEW |
- 1 - Grid support bracket
- 1 - Electrical noise canceling ferrite clip
- 1 - 6 ft. power cord
- 1 - User manual
- 1 - Quick-start guide