Dwyer 2000-00AV
Magnehelic Differential Pressure Gauge, Dual Scale, 0-0.25" w.c., 300-2000 FPM
Dwyer 2000-00AV
Magnehelic Differential Pressure Gauge, Dual Scale, 0-0.25" w.c., 300-2000 FPM
The Dwyer 2000-00AV Magnehelic Differential Pressure Gauge has an accuracy within 4%. The frictionless Magnehelic gauge movement quickly indicates low air or non-corrosive gas pressures; either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures.
- Dual Range: 0 - 0.25" w.c./300-2000 velocity FPM
- Motion damped with high viscosity silicone fluid
- Zero adjustment screw conveniently located in plastic cover
- Range in w.c./Velocity F.P.M.: 0-0.25 / 300-2000
- Bezel provides flange for flush mounting in panel
- Clear plastic face is highly resistant to breakage
- Precision litho-printed scale is accurate and easy to read
- Red tipped pointer of heat treated aluminum tubing is easy to see and is rigidly mounted on the helix shaft
- Pointer stops of molded rubber prevent pointer over-travel without damage
- "Wishbone" assembly provides mounting for helix, helix bearings, and pointer shaft
- Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix
- Motion damped with high viscosity silicone fluid
- Zero adjustment screw is conveniently located in the plastic cover
- O-ring seal provides pressure tightness
- Helix is precision made from an alloy of high magnetic permeability
- Calibrated range spring is flat spring steel
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates
- Diaphragm locked and sealed in position with a sealing plate and retaining ring
- Overpressure Protection
- Blowout plug
- Die cast aluminum case is precision made and iridite-dipped
- Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
- Patented design provides quick response to pressure changes means no delay in assessing critical situations
The Dwyer 200000AV Magnehelic Differential Pressure Gauge, Dual Scale, 0-0.25" w.c., 300-2000 FPM for high accuracy and with a dual W.C. and Air Velocity scale that has an accuracy within 4%. Using Dwyer's simple, frictionless Magnehelic gauge movement, it quickly indicates low air or non-corrosive gas pressures; either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. The 200000AV has a dual scale range of 0 - 0.25" w.c. and 300-2000 velocity FPM.
Brand | Dwyer |
---|---|
Condition | NEW |
Vendor Alias | 2000-00AV |
- 2 - 1/8" NPT plugs for duplicate pressure taps
- 2 - 1/8" pipe thread to rubber tubing adapters
- 3 - Flush mounting adapters with screws
- 1 - User manual