Dwyer 424-250MM
Durablock Inclined/Vertical Manometer, 0-50 mm W.C., 20" Inclined Scale; Vertical Range 52-250 mm W.C.
424250MM
424-250MM
Dwyer 424-250MM
Durablock Inclined/Vertical Manometer, 0-50 mm W.C., 20" Inclined Scale; Vertical Range 52-250 mm W.C.
424250MM
424-250MM
The Dwyer 424-250MM is a Series 424 Durablock® Inclined-Vertical Single Column Manometer. This accurate instrument is made for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20" to provide ample multiplication of indicating fluid movement in this critical lower part of the range.
- 0-50 mm w.c. Inclined, 52-250 cm w.c. Vertical
- 20" Inclined Scale
- Ground glass bubble level
- Single column, 0-50 mm w.c. Inclined and 52-250 cm w.c. Vertical
- 1-1/4" Thick Acrylic Plastic Body is a solid block, virtually unbreakable, stable and absolutely free of danger of distortion
- 3/16" Bores, Accurate to ± .0002" are permanently free of bends or crooks, will not require recalibration because of distortion
- Ground Glass Bubble Level is sensitive to 115-125 sec./2 MM. with two red lines for easy visibility and alignment
- Parallax-Free reading for maximum accuracy and consistency is achieved by simply aligning meniscus with its image reflected in polished aluminum scale
- Selected Gage Fluid with high wettability characteristics forms a consistent, well shaped meniscus for perfect readability
- O-Ring Sealed Fluid Level Plunger Adjustment for easy zeroing
- Precision built to assure device meets highest standards
The Dwyer 424-250MM is a Series 424 Durablock Inclined-Vertical Single Column Manometer. This extremely accurate instrument is made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20˝ to provide ample multiplication of indicating fluid movement in this critical lower part of the range.
Brand | Dwyer |
---|---|
Condition | NEW |
Vendor Alias | 424-250MM |
- 1 - Durablock Inclined Vertical Manometer
- 2 - Bottles of Red Gage Fluid
- 1 - Rapid Shut-Off Type “A” Connections
- 2 - 3' Clear Plastic Tubing
- 2 - 1/8" NPT Tubing Adapters