Dwyer M215D
Durablock Solid Plastic Stationary Gage 2-0-6 MMWC, Type D Connections
The Dwyer M215D is a Series 200 Durablock Solid Plastic Stationary Gage in an inclined style with Type D connections (2 compression fittings for 1/4" O.D. copper or aluminum tubing). It measures low range gas and air pressures, positive, negative or differential. All machining of bores and wells is to high standards.
- Range: 2-0-6 mm w.c.
- 1" thick acrylic plastic body
- Drilled bore accurate to ±.0002" free of bends or crooks
- Parallax-free reading
- Inclined, 2-0-6 mm w.c.
- 1" Thick Acrylic Plastic Body is a solid block, virtually unbreakable, stable and free of danger of distortion
- Drilled Bore Accurate to ±.0002" free of bends or crooks, will not require recalibration because of distortion
- Selected Gage Fluid with high wettability characteristics forms a consistent, well shaped meniscus for most accurate readability
- Adjustable Reflective Polished Aluminum Scales with thumbscrew locking for easy zeroing
- Parallax-Free Reading for maximum accuracy and consistency is achieved by simply aligning meniscus with image reflected in scale
- Over-Pressure Safety Traps prevent loss of fluid due to over range pressures or surges in pressure
- Leveling Adjustment for inclined style gages is achieved by simply loosening locking thumb screw on side or bottom of gage, adjusting with reference to integral sensitive ground glass bubble level and retightening
- Heavy Gage Steel Mounting Panels are gray hammerloid finished
- Precision Built assures device meets highest standards
- Standard units have A-315 3/16" ID tubing connectors, this unit includes Type D connections
The Dwyer M215D is a Series 200 Durablock Solid Plastic Stationary Gage in an inclined style for highly accurate laboratory or general industrial service. It measures low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrications of acrylic instruments.
Brand | Dwyer |
---|---|
Condition | NEW |
Vendor Alias | M215D |
- 1 - Durablock Solid Plastic Stationary Gage
- 1 - Bottle of Red Gage Fluid
- 1 - Gage Connector for 3/16" Rubber Tubing
- 1 - Brass Adapter, 1/8" NPT
- 2 - Compression Fittings for 1/4" O.D. Copper or Aluminum Tubing