E-Mon E20-600200-M-SCS
Class 2000 kWh Submeter, Three-Phase, 600V, 200A, MMU Ready, Pulse Output, 3 Solid-Core Current Sensors w/ 2V Output
E-Mon E20-600200-M-SCS
Class 2000 kWh Submeter, Three-Phase, 600V, 200A, MMU Ready, Pulse Output, 3 Solid-Core Current Sensors w/ 2V Output
- Brand Name: E-Mon D-mon
- Condition: NEW
- Country of Origin: United States
- Multiple Meter Unit (MMU) cabinets not included with unit, please call to configure enclosure
- MMU enclosures containing up to 24 meters in one compact enclosure
- Direct-read 2-line alpha-numeric LCD display without multiplier displays cumulative kWh & "real-time" kW load
- Solid-Core current sensor with 2V output
- Promotes enhanced safety and accurate remote mounting of current sensors up to 2,000 feet from meter without power interruption
- Onboard installation diagnostics & verification system
- Parallel up to three (3) sets of current sensors for cumulative reading
- Meter can be used on the following configurations:
- 3-Phase, 4-Wire
- 3-Phase, 3-Wire
- 2-Phase, 3-Wire
- Fixed-value pulse output
- Non-volatile Memory
- UL/CUL listed
- Revenue Grade Accuracy: Certified by independent test lab to ANSI C12.20 national accuracy standards (+/- 0.2% from 1% to 100% of rated load)
- California CTEP approved for use with solid-core current sensors (listed by the California Energy Commission)
- New York City approved and Con Edison approved for the RSP program
- Other configurations are available, please call for details
The E-Mon E20-600200-M-SCS Class 2000 kWh Submeter, Three-Phase, 600V, 200A, MMU Ready, Pulse Output, 3 Solid-Core Current Sensors w/ 2V Output is a fully electronic low cost meter for monitoring electrical usage in commercial, industrial or institutional facilities. E-Mon's patented 0-2 volt output current sensors allow for quick and safe installation without power interruption. These sensors also allow for meters to be remotely located up to 2,000 feet from the electrical panel they are monitoring. Multiple sets of sensors can be installed on one meter to provide cumulative usage readings for multiple loads.
These meters can also be interfaced with RightEnergy™ software for a complete energy intelligence system monitoring not only Class 2000 meters, but any style E-Mon D-Mon meter or other electric, gas, water and steam meters. The E-mon Demon Class 2000 meters labeled for 120/208V service MUST NOT be installed on service feeds of 277/480V and vice versa.
Country of Origin | United States |
---|---|
Brand | E-Mon D-mon |
Condition | NEW |