Two external meter inputs -- water, gas, BTU, etc. -- stored in channels 5 & 6
Two Pulse outputs (one kWh and one kVARh)
0-2 volt output split-core current sensors allow for enhanced safety and accurate remote mounting of sensors up to 500 feet from meter without power interruption (optional solid-core sensors available)
Onboard installation diagnostics and verification system
Built-in RS-485 communications capability supports the following connection configurations (or combinations not to exceed 52 devices per channel):
Up to 52 Class 3200, 3400 or 5000 meters and/or IDR interval data recorders
Cabling can be either daisy-chain or star configuration, 3-conductor, 18-22 AWG, up to 4,000 cable feet total per channel
Communications: Built-in communication
RS-485
Ethernet
Pulse output
Optional telephone modem
Protocols (*NOTE: Interval data not stored in BACnet or LonWorks units)
EZ7
BACnet MS/TP*
Modbus RTU
BACnet IP*
Modbus TCP/IP
LonWorks FT-10 (Twisted Pair)*
Records kWh & kVARh delivered, kWh & kVARh received in first four channels
Data stored in 15-min intervals for up to 72 days or 5-minute intervals for up to 24 days
Maintains interval data storage in a first-in, first-out format
Compatible with E-Mon Energy software via EZ7 protocol for automatic meter reading, billing and profiling of interval energy data
Meter is designed for use on both 3-phase, 3-wire (delta) and 3-phase, 4-wire (wye) circuits
Outdoor NEMA 4X polycarbonate enclosure (standard) with padlocking hasp & mounting flanges for indoor/outdoor installation (stand alone) with one 1 1/16" KO on bottom of enclosure
Optional industrial grade JIC steel enclosure w/padlocking hasp & mounting flanges for indoor installation with three 1 1/16" KO (3/4" conduit) on bottom of enclosure
UL/CUL Listed: Certified by independent test lab to ANSI C12.20 national accuracy standards (+/- 0.2% from 1% to 100% of rated load)
The E-Mon D-Mon E34-4803200-R-06-X-SP-KIT is a Class 3400 Meter, 480V, 3200A, NEMA 4X Enclosure, Modbus RTU, Modbus TCP/IP Protocol, Expanded Feature Pack - Load Control - Single Phase, 2 Split-Core Current Sensors with 2V Output.