EDSYN FA069
ATMOSCOPE SMD Hot Air Hand Tool 120V 60 Hz
FA069
FA069
EDSYN FA069
ATMOSCOPE SMD Hot Air Hand Tool 120V 60 Hz
FA069
FA069
The EDSYN FA069 ATMOSCOPE SMD 120V/60 Hz Hot Air Hand Tool utilizes a non-contact method of reworking, such as hot air, for both the SMD and circuit board to be kept at lower temperatures. This method results in a faster, cleaner, and safer rework cycle than the conventional contact rework method. The clear handle allows the user to view the indicator for heat regulation.
- Temperature Range: 400° to 800°F
- Power Requirements: 120V, 60 Hz
- Power Rating: 70W
- Zero crossing circuitry
- Uses a wide variety of nozzle sizes
- 95 watt heater provides power for larger components
- External temperature control knob
- Plugs into any 120V three prong wall
- Clear handle to view electronics and heater indicator which lets you know the heat is regulating
Specifications:
- Dimensions: L: 10.5
- Power Requirements: 120V, 60Hz
- Power Rating: 70W
- Weight: 5.5
- Heater: 120V, 95W
- Temp Range: 400°F-800°F/205°C-427°C
- Temp Regulation: ±6°F/±3°C
The EDSYN FA069 ATMOSCOPE SMD Hot Air Hand Tool uses a non-contact method of rework, such as hot air so that both the SMD and the circuit board are kept at lower temperatures. This results in a faster, cleaner and safer rework cycle then the conventional contact rework method
*Requires Regulated Shop Air Source
| Brand | EDSYN |
|---|---|
| Condition | NEW |
| Vendor Alias | FA069 |
- 1 x FA069 ATMOSCOPE SMD Hot Air Hand Tool 120V 60 Hz
- 1 x LT428 LONER SMD Nozzle Hot Air Tip Hole Dia: .06 in. (1.5 mm) L: .25 in. (6.4 mm)
- 1 x OS139 LONER SMD Nozzle Hot Air Tip Hole Dia: .06 in. (1.5 mm) L: .25 in. (6.4 mm)
