Fieldpiece ACH4
Current Clamp Accessory Head, 400AAC, 1.18 in. Diameter
The Fieldpiece ACH4 Current Clamp Accessory Head allows for quickly reading up to 400 AC amps and the claw feature at the top allows for quickly picking out the wire users need to measure and isolating it in the clamp. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on a meter.
- Current Range: 1AAC to 400AAC rms
- Conversion Rate: 1AAC to 1mVAC
- Max. Conductor Diameter: 1.18 in. (30 mm)
- Connects directly to any Fieldpiece Stick Meter
- Jaw claw helps isolate wires for testing
- Find run/start amps of motors/compressors
- Angled jaw opens to 1.8 in. for fast/easy singling out of wires
- Remote amp clamp for hard-to-reach areas using deluxe silicone leads with detachable probe tips (not included)
- Current Range: 1AAC to 400AAC rms
- Conversion Rate: 1AAC to 1mVAC
- Frequency: 50 Hz to 60 Hz
- Max. Conductor Diameter: 1.18 in. (30 mm)
- Safety: IEC61010-1 (EN61010-1)/IEC61010-2-032 (EN61010-2-032), 300V, class 2/pollution degree II indoor use comply with CE
The Fieldpiece ACH4 Current Clamp Accessory Head is a small accessory head for quickly reading up to 400 AC amps. The ACH4's claw feature at the top of the clamp allows for quickly picking out the wire users need to measure and isolating it in the clamp. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on the meter. The ACH4 works with the Fieldpiece Stick Meters, EHDL1 Electronic Handle, DL3 Data Logger, HG2 HVAC Guide System Analyzer, or any other digital multimeter with mVAC range when connected by the Fieldpiece ADLS2 Detachable Silicone Leads or AHDL1 Handle Adapter.
Country of Origin | Taiwan, Province of China |
---|---|
Brand | Fieldpiece |
Condition | NEW |
- 1 - Current Clamp Accessory Head (ACH4)
- 1 - User Manual