Fieldpiece SCM4

Carbon Monoxide (CO) Detector with Backlit Dual Display, 0 to 2000 ppm

SCM4
SCM4

Fieldpiece SCM4

Carbon Monoxide (CO) Detector with Backlit Dual Display, 0 to 2000 ppm

SCM4
SCM4

The Fieldpiece SCM4 Carbon Monoxide Detector is designed to measure carbon monoxide in parts per million (ppm) within still, ambient air. The SCM4 uses a fast reacting, electrochemical sensor that does not consume chemicals and can be easily replaced in the field if needed.

  • CO Range: 0 to 1000 ppm, 0 to 2000 ppm (less than 5 min. exposure time)
  • Alarm rate increases as CO concentration increases
  • Bright blue backlit dual display to test in dark crawl spaces
$285.60 Price $336.00
This item ships FREE
In stock: 4 Units
  • Electrochemical sensor helps find CO sources like cracked heat exchangers/breached flue stacks
  • Fast electrochemical sensor enables walk-around tests
  • Field-replaceable pre-calibrated CO sensor
  • Alarm rate increases as carbon monoxide concentration increases
  • Calibrate to ambient quickly with ZERO button
  • Audio/visual alarms with mute function
  • MAX hold helps zero in on leak source
  • Bright blue backlit dual display to test in dark crawl spaces
  • Magnetic hanger for hands-free operation
  • Battery check with percentage of battery life left displayed
  • Auto Power-Off (APO) to save battery life, easy to disable
Specifications
  • Sensor Type: Electrochemical
  • CO Range: 0 to 1000 ppm, 0 to 2000 ppm (less than 5 min. exposure time)
  • CO Air Sample Temperature Range: 32°F to 105°F
  • Battery Life: 150 hours typical

The Fieldpiece SCM4 Carbon Monoxide (CO) Detector is designed to measure carbon monoxide in parts per million (ppm). The unit is intended to measure levels of CO in still, ambient air. The most practical application of the SCM4 is to determine if the indoor CO levels are higher than outdoor levels and to determine the sources. In many cases, the unit can help locate a source of carbon monoxide in the area and responds to CO level changes in real time.

The SCM4 uses a fast reacting, electrochemical sensor that does not consume chemicals and can be easily replaced in the field if needed. The sensor, both being able to be replaced by the user and offering calibration at start-up, allows for less job downtime. The sensor is fast enough to perform walk-around tests. Sensor life is determined by the type and length of exposure.

More Information
Country of OriginTaiwan, Province of China
BrandFieldpiece
ConditionNEW
UPC872641002947
Vendor AliasSCM4
  • 1 - Carbon Monoxide Detector (SCM4)
  • 1 - 9V Battery, Installed
  • 1 - User Manual