Fisher Labs M-101
Industrial Metal Detector with Rebar Location, Accuracy to 1/4" of Centerline
Fisher Labs M-101
Industrial Metal Detector with Rebar Location, Accuracy to 1/4" of Centerline
The Fisher Labs M101 Rebar Locator and Metal Probe finds reinforcing bars and other metal objects embedded in concrete, conduits, PK nails, wiring and wall studs. Using a small search coil with a concentrated search signal, it offers accuracy to 1/4" of the centerline of the rebar. A preset circuit eliminates ground effects caused by highly mineralized materials and false signals due to loop movement.
- Operating Frequency: 4.5 kHz
- Sensitivity Adjustment Range: 12:1
- Designed specifically for finding reinforcing bars and other metal objects embedded in concrete
- Accuracy to 1/4 in. of the centerline of the rebar
- Operating Frequency: 4.5 kHz
- Power Supply: +/- 9V, 2 - 9V NEDA 1604
- Operating Frequency of Search Coil: 4.5 kHz
- Sensitivity Adjustment Range: 12:1
- Output Indication: Meter - 1 milliamp, 1 - 100 linear scale
- Audio Frequency: 450 Hz
- Coil Configuration: Double D
- Control Box Dimensions: 3 x 5 x 6 inches (8 x 12 x 16 cm)
- Handle Dimensions: 0.75 x 23 inches (1.9 x 58.4 cm)
The Fisher Labs M101 Rebar Locator and Metal Probe was designed specifically for finding reinforcing bars and other metal objects embedded in concrete, conduits, PK nails, wiring, wall studs and other metallic objects. The M-101 will respond to all types of metal (rebar, wire mesh, metal conduit, metallic trash, metallic targets on the opposite side of surface to be scanned, etc.) Using a small search coil that provides a concentrated search signal, the M-101 offers accuracy to 1/4 in. of the centerline of the rebar. For most operations, only the penetration control needs to be adjusted to allow maximum penetration depth for metals. A preset circuit eliminates ground effects caused by highly mineralized materials and false signals due to loop movement.
The M-101 also can effectively locate small metal items carried on or within a person and is substantially more sensitive than the average low cost metal detectors used at airports, so that a given metal item can be found at a greater distance from the search loop itself. Searches in water may be up to the control box, as the search loop and cord are waterproof.
Vendor Alias | M101 |
---|---|
Country of Origin | United States |
Brand | Fisher Labs |
Condition | NEW |
- 1 - Carrying Case
- 1 - Harness
- 1 - User Manual