Fluke 190-204-III CAL

Our Part No. 190204IIICAL

Mfr. Model 190-204-III CAL

Catalog No. 5313317

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Fluke 190-204-III CAL

Our Part No. 190204IIICAL

Mfr. Model 190-204-III CAL

Catalog No. 5313317

The Fluke 190-204-III CAL is a Color ScopeMeter with a Built-in DMM and External Input engineered to go wherever users go, troubleshooting jobs along the way. This CAT III 1000 V/CAT IV 600V rated tool combines rugged portability with the performance of a bench oscilloscope for installing, commissioning and maintaining industrial machinery.

Bandwidth: 200 MHz
Number of Channels: 4
Sample Rate: 2.5 GS/s
Includes NIST Certificate of Calibration

This product is available for shipping to the US, Canada, and Puerto Rico only.

Datasheet

$6,365.99

This item ships FREE

Key Features

Bandwidth: 200 MHz
Number of Channels: 4
Sample Rate: 2.5 GS/s
Includes NIST Certificate of Calibration
CAT III 1000 V/CAT IV 600 V rated portable oscilloscopes
Connect-and-View™ triggering automatically displays waveforms without having to adjust amplitude, timebase and trigger settings
Large, bright color display for easy in-the-field viewing and both USB and Wi-Fi data download options for analyzing data with FlukeView® software

Oscilloscope modes

Number of channels: Four (4)
Bandwidth: 200 MHz
Rise time: 1.7 ns
Number of scope inputs: 4 input channels
Channel architecture: All inputs fully insulated from each other and from ground; Inputs may be activated in any combination
Input coupling: AC or DC, with ground level indicator
Input sensitivity: With 10:1 probe, 20 mV to 1000 V/div; With 100:1 probe, 200 mV to 10 kV/div; Direct (1:1), 2 mV to 100 V/div
Bandwidth limiter: 20 MHz and 10 kHz
Polarity: Normal, Inverted, Variable
Vertical resolution: 8 bit
Accuracy at 4 s to 10 μs/div: 5 mV/div to 100 V/div, ±(1.5 % + 6 counts); 2 mV/div, ±(1.5 % + 10 counts)
Input impedance: 1 MΩ (± 1 %) // 15 pF (± 2.25 pF)
Horizontal
Maximum realtime sample rate (sampled simultaneously): 2.5 GS/s (2ch) 1.25 GS/s (4ch)
Record length: Up to 10,000 samples per channel
Time base range: 2 ns/div to 4 s/div; Time base in a 1-2-4-sequence; Slower time/division settings using ScopeRecord™ Roll mode
Maximum record length: 10,000 samples per channel in scope mode; 30,000 points per channel in ScopeRecord™ Roll mode
Timing accuracy: ± (0.01 % of reading + 1 pixel)
Glitch capture: 8 ns (10 μs/div to 2 min/div)
Display and acquisition
Display: 133 mm x 90 mm (5.3 in x 3.5 in) full-color high brightness LCD
Display modes: Any combination of channels; average on/off; replay
Visible screen width: 12 divisions horizontally in scope mode
Digital persistence modes: Off, short, medium, long, infinite and envelope mode
Waveform mathematics: One (190-xx2) or two (190-x04) mathematical operations on 2 input channels (A and B, C and D): add, subtract, multiply; X-Y-mode; Frequency Spectrum using FFT
Acquisition modes: Normal, Averaged, Auto, Single Shot, ScopeRecord™ roll, glitch capture, waveform compare with automatic "Pass/Fail testing"; Replay
Trigger and delay
Source: Input A, B, C or D

Details

The Fluke 190204IIICAL 4-Channel Color ScopeMeter with NIST Calibration, 200 MHz is engineered to go where the user goes, and tackles just about any troubleshooting job along the way. This CAT III 1000 V/CAT IV 600V rated test tool combines rugged portability with the high performance of a bench oscilloscope to help users take on the challenges of installing, commissioning and maintaining industrial machinery, automation and process controls, and power conversion electronics with ease.

Fast sampling rates, high resolution and deep memory allow high-accuracy capture and display of waveform details, noise, and other disturbances. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Features like TrendPlot™ Paperless Recorder, ScopeRecord™ Mode, Connect-and-View™ Triggering and a unique 100-screen Replay function help users quickly diagnose issues to minimize repair costs and downtime. These features make the 190-204-III CAL oscilloscope easy to use, especially when diagnosing the most difficult problems like complex waveforms, induced noise, intermittent events, and signal fluctuations or drift.

Measure from mV to kV safely

Independently isolated inputs allow users to make measurements in mixed circuits with different ground references, which reduces the risk of accidental short circuits. Conventional bench oscilloscopes without special differential probes and isolation transformers can only reference measurements to line power earth ground. The 190-204-III CAL test tool is engineered to cover a wide application range from mV to kV, so that users are ready for anything from microelectronics to heavyduty higher voltage electrical applications. The 190-204-III CAL 200MHz configuration includes VPS410-II 10:1 probes suitable for both microelectronics and higher voltage applications.

IP-51 rated for harsh environments

Rugged and shock-proof, 190-204-III CAL is built for dirty, hazardous environments. With its sealed case, it can endure dust, drips, humidity and airborne pollutants. Every time a user reaches for their 190-204-III CAL, they can be confident that it will work reliably wherever the work takes them.

USB and Wi-Fi connectivity

The Fluke 190-204-III CAL offers two USB ports, electrically isolated from measurement input circuits allowing users to quickly and easily transfer data to a PC, archive and share waveforms with OEMs, colleagues and support staff, or store waveforms, screen captures and instrument setups onto USB memory devices for later use. Easily transfer saved files via USB stick, direct connection via the USB interface or optional Wi-Fi connectivity (not included). These files can be used for further data handling or in FlukeView-2 Software to study waveforms in greater detail.

Connect-and-View

Connect-and-View triggering

Connect-and-View triggering provides an instant, stable display without the need for adjusting settings. Triggering can be difficult with other scopes. If settings are incorrect, results can be unstable or incorrect. Connect-and-View automatically sets up correct triggering by recognizing signal patterns. Without touching a button, users will get a stable, reliable and repeatable display of virtually any signal, including motor drive and control signals. The 190-204-III CAL is especially fast and convenient for measuring a number of test points in rapid succession.

ScopeRecord™ Mode

ScopeRecord™ mode for high resolution waveform recording

ScopeRecord memory stores up to 30,000 or more data points per channel, capturing fast intermittent events and glitches as short as 8 ns. (Two sets of multiple channel recordings can be stored to internal memory for later analysis.)

Records events like UPS, power supply or motor start-up cycles
With the Stop on Trigger mode, the ScopeMeter Test Tool automatically recognizes a power failure and stores the waveform data preceding it

Trend multiple measurements capturing signal intermittent events, signal drift or fluctuations

TrendPlot

TrendPlot paperless recorder records up to 11 days to help users find intermittent faults

The toughest faults to find are those that happen only once in a while. These intermittent events can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, dips, swells and interruptions, or the starting and stopping of a motor can also cause a machine to stop. A user may not be around when it happens, but the 190-204-III CAL will be.

Plot minimum and maximum peak values and average over time
Plot any combination of up to four readings including voltages, amps, temperature, frequency and phase for all inputs, all with time and date stamp to pinpoint faults

FlukeView™ 2 ScopeMeter software for documenting, archiving and analysis

Get more out of the ScopeMeter Test Tool with FlukeView 2 ScopeMeter Software for Windows.

FlukeView™ 2 Software

Documentation: Transfer waveforms, screens and data to a PC for printing or importing data into a report
Add text to ScopeMeter Test Tool settings: Give operators guidance when recalling settings
Archive: Create a library of waveforms for easy reference, or waveform comparison
Analysis: Use cursors or export data to another analysis program

More Information