Fluke 700HTP-2
Hydraulic Test Pump, 10000 psi, 690 bar
700HTP2
700HTP-2
4096855
The Fluke 700HTP-2 is a Hydraulic Test Pump that is hand operated, designed to generate calibration pressures up to 10,000 psi/690 bar. It is designed for use with the Fluke 700 series high pressure modules.
- Pressure: 10000 psi, 700 bar
- Two pressure ports: 1/4 in. NPT female parallel thread fitting for reference gauge or pressure module; 1/4 in. NPT female parallel thread fitting for unit under test
- Pressure: 10000 psi, 700 bar
- Two pressure ports: 1/4 in. NPT female parallel thread fitting for reference gauge or pressure module; 1/4 in. NPT female parallel thread fitting for unit under test
- Provides up to 10000 psi using distilled water or mineral-based hydraulic oil
- Operate by pumping several strokes to prime system, then switch to high-pressure mode when resistance increases
- Integral pressure adjustment vernier knob varies pressurized volume by 0.6 cc
- Pressure variation achievable with vernier depends on nominal pressure and total pressurized volume
- With minimum volume, vernier provides 150 to 3000 psi (at 150 psi nominal) and 3000 to 10000 psi (at 3000 psi nominal)
- With minimum volume and no pressure, vernier can also provide 0 to 1.7 psi
- Larger volumes provide smaller range of adjustment, but greater resolution
- For use with 700, 750P, 710 and 720 Series
The Fluke 700HTP-2 Hydraulic Test Pump, 10000 psi, 690 bar is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. It is designed for use with the Fluke 700 series high pressure modules.
Country of Origin | China |
---|---|
Brand | Fluke |
Catalog | 4096855 |
Condition | NEW |
UPC | 095969610995 |
Vendor Alias | FLUKE-700HTP-2 |
- 1 - NPT Adapter
- 1 - Metric (BSP) Adapter
- 1 - M20 Adapter
- 1 - Traceable Certificate of Calibration
- 1 - User Manual