Fluke 773 CAL
Milliamp Process Clamp Meter with Loop Power and NIST Calibration, 4-20 mA and DC Volts Source/Measure
Fluke 773 CAL
Milliamp Process Clamp Meter with Loop Power and NIST Calibration, 4-20 mA and DC Volts Source/Measure
The Fluke 773 CAL is a Milliamp Process Clamp Meter that is a highly accurate and versatile tool designed for efficient measurement of 4-20 mA signals. With its innovative design, it saves time by measuring output signals without shutting down the system.
- DC voltage measurement to verify 24V power supplies or voltage I/O signals
- Source DC voltage to test input devices
- Includes NIST Certificate of Calibration
- DC voltage measurement to verify 24V power supplies or voltage I/O signals
- Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
- Scaled mA output provides a continuous mA signal that corresponds to 4 to 20 mA signal measured by mA clamp
- Output mA signal enables logging digital multimeter or other device to record 4 to 20 mA signal without breaking loop
- mA in/out: Simultaneously measure mA signal with clamp and source mA signal
- Apply mA input signal to device and measure its 4 to 20mA output on devices such as valves or mA isolators
- Voltage output linear ramp or 25% step output
- Automatically change voltage output for remote testing
- Includes NIST Certificate of Calibration
The Fluke 773 CAL milliamp clamp meter is accurate, versatile, and highly portable. It saves time and money by measuring 4–20 mA signals five times faster than with traditional multimeters, and without breaking the loop. That means users can troubleshoot a live device without having to power down and possibly miss something going on in the process.
The 773 CAL is ideal for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in process plants. The 773 allows users to connect to a mA loop in a traditional series workflow to measure, source, or simulate a control system. And it measures up to 99.0 mA non-contact, including 10 to 50 mA signals in older control systems.
The 773 also sources and measures DC voltage, so it can be used to troubleshoot voltage input and output devices that accept a 1-5 V or 0 to 10 V signal. Detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces.
An integrated measurement spotlight illuminates hard to see wires in dark enclosures while a dual backlit display can show mA measurement and percent of 4 to 20 mA span simultaneously. Use the Hold function to capture measurements on-screen for verification and recording purposes. Plus, automatic power-off features save battery life so users can work longer without changing the batteries.
With the unique mA scale feature users can measure a mA signal without breaking the loop and output that signal to another device to record the measurements. The 773 also includes simultaneous mA in-circuit measurement with 24 V loop power for powering and testing transmitter. Apply a mA input signal to a device and measure its 4-20 mA output on devices such as valves or mA isolators. Offers mA or voltage output linear ramp or 25% step output.
Country of Origin | Taiwan, Province of China |
---|---|
Brand | Fluke |
Catalog | 5160682 |
Condition | NEW |
UPC | 095969946940 |
Vendor Alias | FLUKE-773 CAL |
- 1 - Milliamp Process Clamp Meter with Loop Power, 4-20 mA and DC Volts Source/Measure (773 CAL)
- 1 - Test Lead Set (TL75)
- 1 - Test Clip Set (AC72)
- 1 - Pair of Mini Hook Test Leads (TL940)
- 4 - AA Alkaline Batteries (Installed)
- 1 - NIST Calibration
- 1 - Magnetic Hanging Strap
- 1 - Soft Carrying Case
- 1 - User Manual
- 1 - 3 Year Warranty