Fluke 80i-2010s
AC/DC Current Clamp, 2000 AAC rms, ± 2000 ADC
80I2010S
80i-2010s
- Clamp-on current probe
- Modules: 80i-2010s
- Dimensions: 110 mm x 270 mm x 46mm
- Clamp-on current probe
- Modules: 80i-2010s
- Dimensions: 110 mm x 270 mm x 46mm
- Weight: 0.710 kg (1.6 lbs), including battery
- Output cable: 1.5 m (60 in) Shielded Coaxial cable with BNC plug
- Maximum conductor: Size 52.0 mm (2.05 in)
- Maximum jaw opening: 81.5 mm
- Output to zero: Auto adjustment with Zero button
- Temperature operating: -10 °C to 50 °C (14 °F to 122 °F)
- Storage (battery removed): -30 °C to +60 °C (-22 °F to +140 °F)
- Operating humidity: ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)
- Altitude: Operating 2,000 m (6560 ft)
- Storage: 12,000 m (40,000 ft)
- Demagnetize clamp: Open and close the Clamp jaws several times with soft click, use of clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less
- Safety: IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
- Ingress: Protection IEC 60529, IP40
- Power supply: Type 2 x AA alkaline battery, IEC LR6
- Battery life: 150 hours (typically)
- Low battery indicator: Yes
Country of Origin | China |
---|---|
Brand | Fluke |
Condition | NEW |