Fluke Calibration 1523-P4-256
1523 Single Channel Handheld Thermometer Readout with 5615-12-P Probe, LEMO to TC Adapter, and Carrying Case
Fluke Calibration 1523-P4-256
1523 Single Channel Handheld Thermometer Readout with 5615-12-P Probe, LEMO to TC Adapter, and Carrying Case
- Kit includes 1523 Single Channel Handheld Thermometer Readout, 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, TPAK ToolPak Magnetic Hanging Kit, and Carrying Case
- Kit includes 1523 Single Channel Handheld Thermometer Readout, 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, TPAK ToolPak Magnetic Hanging Kit, and Carrying Case
Single Channel Handheld Thermometer Readout (1523)
- Input channels: 1
- Resolution PRTs and thermistors: 0.001°; thermocouples: 0.01°
- Logging: 25 readings with statistics
- Sample interval (normal): 1 second
Secondary Standard PRT Probe (5615-12-P)
- Termination: INFO-CON for Models 1523 and 1524
- Temperature range: -200 °C to 420 °C
- Nominal resistance at 0 °C: 100 Ohm ± 0.10 Ohm
- Temperature coefficient 0.0039250 Ohm/Ohm/°C
- Accuracy (includes calibration and 100 hr drift (k=2)): ±0.024 °C at -200 °C; ±0.012 °C at 0 °C; ±0.035 °C at 420 °CC
- Short-term repeatability (three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2)): ±0.009 °C at 0.010 °C
- Drift (After 100 hrs at max temp, 95 % confidence (k=2)): ±0.007 °C at 0.010 °C
- Sensor length: 28 mm (1.1 in.)
- Sensor location: 6.9 mm ± 3.3 mm from tip (0.27 in. ± 0.13 in.)
- Sheath dimensions: 305 mm x 6.35 mm (12.0 in. x 0.250 in.)
- Sheath diameter tolerance: ±0.127 mm (±0.005 in.)
- Sheath material: Inconel 600
- Minimum insulation resistance: 1000 MOhm at 23 °C
- Transition junction temperature range (temperatures outside this range will cause irreparable damage; for best performance, transition junction should not be too hot to touch): -50 °C to 200 °C
- Transition junction dimensions: 71 mm x 13 mm dia (2.8 in. x 0.5 in.)
- Maximum immersion length: 254 mm (10 in.)
- Response time (Per ASTM E 644): 9 seconds typical
- Self heating (in 0 °C bath): 50 mW/°C
- Lead-wire cable type: PTFE insulated with PTFE jacket, 22 AWG
- Lead-wire length: 183 cm (72 in. or 6 ft.)
- Lead-wire temperature range: -50 °C to 200 °C
- Calibration: NVLAP-accredited calibration included, lab code 200706-0
ToolPak Magnetic Hanging Kit (TPAK)
- Solve almost any hanging and positioning problem
- Universal hanger allows you to hang meters on nails, hooks and many other objects
- For use with many Fluke instruments
The Fluke Calibration 1523-P4-256 includes a 1523 Single Channel Handheld Thermometer Readout, a 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, a TPAK ToolPak Magnetic Hanging Kit, and a Carrying Case.
The Fluke Calibration 1523 Single Channel Handheld Reference Thermometer is a versatile single-channel thermometers that measures, graphs and records three sensor types with one tool. Support for PRTs/RTDs, thermocouples, and thermistors provide flexibility to choose the right probe for the job.
The Fluke Calibration 1523 lets you handle field applications, laboratory measurements, and data logging with ease.
Make Accurate, Consistent Measurements Anywhere
Compliance, product yields, energy savings, and consistent results require accuracy. The 1523 uses current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements. Specifications are guaranteed from -10 °C to 60 °C ambient. Special precision resistors and a highly stable reference voltage source keep 1523 accuracy virtually insensitive to environmental temperature.
The Fluke Calibration 1523 Reference Thermometer endures rigorous testing in temperature extremes and under harsh conditions of vibration, so that you can take it anywhere with confidence. An optional magnetic hanger allows you to hang the thermometer for easy viewing while freeing your hands to focus on the job.
Monitor Trends in the Lab or in the Field
See trends graphically on the 1523's 128 x 64-backlit LCD display. Change the graph's resolution with the touch of a button. Now it is easy to see when the temperature is stable (without statistics or long delays), or to monitor processes over time to verify correct operation.
Hold readings on the display at the touch of a button, or document up to 25 readings and associated statistics for easy retrieval. Statistics include the average maximum and minimum values, and the standard deviation. View them through the display or by uploading it to a PC via RS-232 connection and 9940 I/O TookKit software (included free). To monitor and log more data over time, use a PC and optional LogWare II software.
RS-232-to-USB adapters are available for those who prefer USB connectors. Battery power lasts at least 20 hours on three AA batteries, or use the DC power adapter for extended periods of measurement. Power saving features can be enabled or disabled for longer battery life or greater convenience.
INFO-CON Connectors Ensure Correct Temperature Conversion
Inside the INFO-CON, a memory chip keeps calibration information for the attached probe. Simply plugging in the probe uploads the information to the readout. The connector transfers this information to the 1523 automatically, ensuring the correct temperature conversion for accurate, hassle-free measurements.
Probes may be locked by password to specific channels and readouts for security or for system calibration traceability. Plug any thermocouple with mini-thermocouple jacks into an optional universal thermocouple adapter for convenient measurement. Each thermocouple adapter or standard connector supports reference junction compensation (RJC) with its own internal precision thermistor.
The Fluke Calibration 5615-12-P Secondary Standard PRT Probe with INFO-CON for 1523/1524, 12 in. x 1/4 in., -200 °C to 420 °C, 6 ft. Lead has an Inconel 600 sheath that is 305 mm (12 in.) long and 6.35 mm (0.250 in.) in diameter. It is a secondary reference temperature standard designed to bridge the gap between the highest laboratory standards and industrial or second-tier lab locations. It has accuracy of ± 0.012 °C at 0.01 °C.
The element is constructed of reference-grade platinum wire (99.999% pure) for excellent stability. The wire is wound into a coil and placed in a mandrel where it is uniformly supported in a manner that virtually eliminates hysteresis. The electrical configuration is a four-wire current-potential hookup that eliminate the effects of lead-wire resistance.
This Inconel-sheathed probes has a fully supported sensing element, making it more durable than an SPRT. The element is protected in an ultra-high-purity ceramic case with a hermetic glass seal to improve output stability by locking out moisture and contaminants.
The Fluke Calibration 5615-12-P comes calibrated with ITS-90 coefficients, making it compatible with many excellent readout devices, including Fluke Calibration's 1529 Chub-E4, 1560 Black Stack, and 1502A Tweener. It bridges the gap between a 100-ohm industrial RTD and an SPRT.
Country of Origin | United States |
---|---|
Brand | Fluke Calibration |
Condition | NEW |
- 1 - 1523 Single Channel Handheld Thermometer Readout
- 1 - 5615-12-P Secondary Standard PRT Probe
- 1 - Universal TC INFO-CON Connector
- 1 - TPAK ToolPak Magnetic Hanging Kit
- 1 - Carrying Case