Fluke Calibration 1524-P4-256

Our Part No. 1524P4256

Mfr. Model 1524-P4-256

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Fluke Calibration 1524-P4-256

Our Part No. 1524P4256

Mfr. Model 1524-P4-256

Kit includes 1524 Dual Channel Handheld Thermometer Readout, 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, TPAK ToolPak Magnetic Hanging Kit, and Carrying Case

This product is available for shipping to the US, Canada, and Puerto Rico only.

$4,923.59 Price $5,350.00

This item ships FREE

Key Features

Kit includes 1524 Dual Channel Handheld Thermometer Readout, 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, TPAK ToolPak Magnetic Hanging Kit, and Carrying Case

Dual Channel Handheld Thermometer Readout (1524)

Input channels: 2
Resolution PRTs and thermistors: 0.001°; thermocouples: 0.01°
Logging: 25 readings with statistics/15,000 time and date stamped
Sample interval (normal): 1 second (simultaneous measurement)

Secondary Standard PRT Probe (5615-12-P)

Termination: INFO-CON for Models 1523 and 1524
Temperature range: -200 °C to 420 °C
Nominal resistance at 0 °C: 100 Ohm ± 0.10 Ohm
Temperature coefficient 0.0039250 Ohm/Ohm/°C
Accuracy (includes calibration and 100 hr drift (k=2)): ±0.024 °C at -200 °C; ±0.012 °C at 0 °C; ±0.035 °C at 420 °CC
Short-term repeatability (three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2)): ±0.009 °C at 0.010 °C
Drift (After 100 hrs at max temp, 95 % confidence (k=2)): ±0.007 °C at 0.010 °C
Sensor length: 28 mm (1.1 in.)
Sensor location: 6.9 mm ± 3.3 mm from tip (0.27 in. ± 0.13 in.)
Sheath dimensions: 305 mm x 6.35 mm (12.0 in. x 0.250 in.)
Sheath diameter tolerance: ±0.127 mm (±0.005 in.)
Sheath material: Inconel 600
Minimum insulation resistance: 1000 MOhm at 23 °C
Transition junction temperature range (temperatures outside this range will cause irreparable damage; for best performance, transition junction should not be too hot to touch): -50 °C to 200 °C
Transition junction dimensions: 71 mm x 13 mm dia (2.8 in. x 0.5 in.)
Maximum immersion length: 254 mm (10 in.)
Response time (Per ASTM E 644): 9 seconds typical
Self heating (in 0 °C bath): 50 mW/°C
Lead-wire cable type: PTFE insulated with PTFE jacket, 22 AWG
Lead-wire length: 183 cm (72 in. or 6 ft.)
Lead-wire temperature range: -50 °C to 200 °C
Calibration: NVLAP-accredited calibration included, lab code 200706-0

ToolPak Magnetic Hanging Kit (TPAK)

Solve almost any hanging and positioning problem
Universal hanger allows you to hang meters on nails, hooks and many other objects
For use with many Fluke instruments

Details

The Fluke Calibration 1524-P4-256 includes a 1524 Dual Channel Handheld Thermometer Readout, a 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, a TPAK ToolPak Magnetic Hanging Kit, and a Carrying Case.

The Fluke Calibration 1524 Dual Channel Handheld Reference Thermometer helps you do twice the work in half the time. Two channels, three sensor types, data logging, and high-speed measurement make you more productive and make the 1524 the only reference thermometer you need. A real-time clock and memory for 15,000 time and date stamped measurements mean everything that you are going to need is in this package. Log up to three times per second, or once every hour or other options in between. Download the data to a PC for analysis when you need it.

The Fluke Calibration 1524 lets you handle field applications, laboratory measurements, and data logging with ease.

Make Accurate, Consistent Measurements Anywhere

Compliance, product yields, energy savings, and consistent results require accuracy. The 1524 uses current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements. Specifications are guaranteed from -10 °C to 60 °C ambient. Special precision resistors and a highly stable reference voltage source keep 1524 accuracy virtually insensitive to environmental temperature.

The Fluke Calibration 1524 Reference Thermometer endures rigorous testing in temperature extremes and under harsh conditions of vibration, so that you can take it anywhere with confidence. An optional magnetic hanger allows you to hang the thermometer for easy viewing while freeing your hands to focus on the job.

Monitor Trends in the Lab or in the Field

See trends graphically on the 1524's 128 x 64-backlit LCD display. Change the graph's resolution with the touch of a button. Now it is easy to see when the temperature is stable (without statistics or long delays), or to monitor processes over time to verify correct operation.

Hold readings on the display at the touch of a button, or document up to 25 readings and associated statistics for easy retrieval. Statistics include the average maximum and minimum values, and the standard deviation. View them through the display or by uploading it to a PC via RS-232 connection and 9940 I/O TookKit software (included free). To monitor and log more data over time, use a PC and optional LogWare II software.

RS-232-to-USB adapters are available for those who prefer USB connectors. Battery power lasts at least 20 hours on three AA batteries, or use the DC power adapter for extended periods of measurement. Power saving features can be enabled or disabled for longer battery life or greater convenience.

INFO-CON Connectors Ensure Correct Temperature Conversion

Inside the INFO-CON, a memory chip keeps calibration information for the attached probe. Simply plugging in the probe uploads the information to the readout. The connector transfers this information to the 1524 automatically, ensuring the correct temperature conversion for accurate, hassle-free measurements.

Probes may be locked by password to specific channels and readouts for security or for system calibration traceability. Plug any thermocouple with mini-thermocouple jacks into an optional universal thermocouple adapter for convenient measurement. Each thermocouple adapter or standard connector supports reference junction compensation (RJC) with its own internal precision thermistor.

The Fluke Calibration 5615-12-P Secondary Standard PRT Probe with INFO-CON for 1523/1524, 12 in. x 1/4 in., -200 °C to 420 °C, 6 ft. Lead has an Inconel 600 sheath that is 305 mm (12 in.) long and 6.35 mm (0.250 in.) in diameter. It is a secondary reference temperature standard designed to bridge the gap between the highest laboratory standards and industrial or second-tier lab locations. It has accuracy of ± 0.012 °C at 0.01 °C.

The element is constructed of reference-grade platinum wire (99.999% pure) for excellent stability. The wire is wound into a coil and placed in a mandrel where it is uniformly supported in a manner that virtually eliminates hysteresis. The electrical configuration is a four-wire current-potential hookup that eliminate the effects of lead-wire resistance.

This Inconel-sheathed probes has a fully supported sensing element, making it more durable than an SPRT. The element is protected in an ultra-high-purity ceramic case with a hermetic glass seal to improve output stability by locking out moisture and contaminants.

The Fluke Calibration 5615-12-P comes calibrated with ITS-90 coefficients, making it compatible with many excellent readout devices, including Fluke Calibration's 1529 Chub-E4, 1560 Black Stack, and 1502A Tweener. It bridges the gap between a 100-ohm industrial RTD and an SPRT.

More Information