Fluke Calibration 5609-15-D
Secondary Reference PRT Probe with 5-Pin DIN for Tweener Thermometers, 15 in. x 1/4 in., -200 °C to 670 °C, 6 ft. Lead
560915D
5609-15-D
Fluke Calibration 5609-15-D
Secondary Reference PRT Probe with 5-Pin DIN for Tweener Thermometers, 15 in. x 1/4 in., -200 °C to 670 °C, 6 ft. Lead
560915D
5609-15-D
- Termination: 5-pin DIN for Tweener Thermometers
- Temperature range: -200 °C to 670 °C
- Nominal resistance at 0.01 °C: 100 Ohm ± 0.5 Ohm
- Temperature coefficient: 0.0039250 Ohm/Ohm/°C
- Relative Accuracy ( Includes short-term repeatability and 100 hr drift; calibration will add additional uncertainties): ±0.007 °C at -200 °C; ±0.008 °C at 0 °C; ±0.020 °C at 420 °C; ±0.027 °C at 660 °C
- Short-term repeatability (Three thermal cycles from min to max temp, includes hysteresis, 95% confidence (k=2)): ±0.007 °C at 0.010 °C; ±0.013 °C at max temp
- Drift (After 100 hours at max temp, 95 % confidence (k=2)): ±0.01 °C at 0.010 °C; ±0.02 °C at max temp
- Hysteresis: ±0.01 °C maximum
- Sensor length: 30 mm ± 5 mm (1.2 in. ± 0.2 in.)
- Sensor location: 3 mm ± 1 mm from tip (0.1 in. ± 0.1 in.)
- Sheath material: Inconel 600
- Minimum insulation resistance: 500 MOhm at 23 °C, 10 MOhm at 670 °C
- Transition junction temperature range (Temperatures outside this range will cause irreparable damage; for best performance, transition junction should not be too hot to touch): -50 °C to 200 °C
- Transition junction dimensions: 71 mm x 12.5 mm (2.8 in. x 0.49 in.)
- Minimum immersion length (Per ASTM E 644) (<5 mK error): 100 mm (3.9 in)
- Maximum immersion length: 305 mm (12 in)
- Response time (Per ASTM E 644): 12 seconds typical
- Self heating (in 0 °C bath): 50 mW/°C
- Lead-wire cable type: PTFE 24 AWG
- Lead-wire length: 1.8 m (6 ft)
- Lead-wire temperature range: -50 °C to 250 °C
- Size: 15 in. x 1/4 in.
Model No.
Qty.
Cart Subtotal (%1 items):
All taxes, shipping fees and discounts will be applied at checkout.