The Fluke Calibration 9132156 Portable Infrared (IR) Calibrator, 50 °C to 500 °C (122 °F to 932 °F), 115VAC provides a stable, blackbody target for calibrating noncontact IR thermometers.

The 9132-156 features a large, temperature controlled blackbody target with a diameter of 2.25 in. (57 mm), which offers a large field of view area for optical variations in infrared thermometers. The emissivity of the isothermal target is set at 0.95, and the target temperature can be controlled in set-point increments of 0.1°. For even higher precision, a well is located directly behind the blackbody surface for contact calibration. Using an optional calibrated PRT and readout device, target accuracy of ±0.075 °C can be achieved.

The Fluke Calibration 9132-156 is as easy to use as "point and shoot." Simply set the desired blackbody temperature from the convenient front panel control buttons, wait a few minutes for equilibrium, and point the gun at the target. The radiated energy from the blackbody is measured by your IR thermometer. Simply compare its reading to the display on the blackbody and record the difference.

For IR calibrations above normal ambient, the Fluke Calibration 9132-156 provides a stable blackbody target up to 500 °C (932 °F). With accuracy to ±0.5°C and stability to ±0.1 °C, this portable IR unit can certify most handheld pyrometers.

Short heating and cooling times mean you will not have to wait long to get your work done. From room temperature to 500 °C, the 9132-156 will be stable within 30 minutes.