Fluke Calibration 9938-V5-NS

MET/TEMP II Temperature Calibration Software (No SmartSwitch)

9938V5NS
9938-V5-NS

Fluke Calibration 9938-V5-NS

MET/TEMP II Temperature Calibration Software (No SmartSwitch)

9938V5NS
9938-V5-NS

The Fluke Calibration 9938-V5-NS (5437493) MET/TEMP II Temperature Calibration Software enables the user to automate the calibration on a wide range of temperature sensors. This software provides a temperature calibration solution for testing batches of sensors, calculating characterization coefficients, and printing calibration reports.

  • Choice of calibration method of comparison, fixed-point, mixed
  • ANSI/NCSL compliant report of calibration
This product is available for shipping to the US, Canada, and Puerto Rico only.
  • Fully automated, consistent sensor calibration
  • Tests broad workload of temperature sensors
  • Multiplies user's lab productivity
  • Proven, trusted calibration software
  • Easy to learn, easy to use
  • Choice of calibration method of comparison, fixed-point, mixed
  • Heat source calibrations
  • Supports many test equipment configurations
  • Automatically logs ambient conditions
  • Asset management capabilities
  • Coefficient calculation for many sensor types
  • Data quality check
  • Interpolation tables
  • ANSI/NCSL compliant report of calibration

System Requirements

Hardware Requirements
  • Computer with 1 GHz or faster 32-bit (x86)/64-bit (x64) processor
  • 1 GB RAM (32-bit)/2 GB RAM (64-bit)
  • VGA monitor or better
  • CD-ROM drive for software installation
  • Minimum 100 MB disk space for software installation
  • USB/RS-232 port
Equipment Requirements
  • USB to RS-232 adapter
  • SmartSwitch box (not included), supports 8-port/6-port models
  • Multiple physical COM ports/USB to RS-232 adapters can be used in place of SmartSwitch to support multiple instruments
  • Up to 6 null modem cables to connect test equipment to SmartSwitch ports (not included)
Software Requirements
  • One Microsoft operating system-- Windows 7 32-bit/64-bit, Windows 8/8.1 32-bit/64-bit, Windows 10 32-bit/64-bit, Windows 11 32-bit/64-bit

Fluke Calibration Instruments Supported

Thermometer Readouts
  • 1502A/1504 Tweener
  • 1523/1524 Reference Thermometers
  • 1529 Chub-E4 Readout
  • 1560 Black Stack (with optional modules)
  • 1594A/1595A Super Thermometer (2590 multiplexer optional)
  • 1586A Super-DAQ Precision Temperature Scanner
Temperature Sources
  • 9142/9143/9144 Field Metrology Wells
  • 9190A Ultra-Cool Field Metrology Well
  • 9170/9171/9172/9173 Metrology Wells
  • 9103/9140 Dry-Well Calibrators
  • 9009 Dual-Block Calibrator
  • 9011 Dual-Well Calibrator
  • 9100S/9102S Handheld Dry-Well
  • 9101 Zero-Point Dry-Well
  • 6020/6022/6024 Hot Oil Baths
  • 6050H Extremely Hot Salt Bath
  • 6054/6055/7007 Deep Well Baths
  • 6102/7102/7103 Micro-Baths
  • 6330/7320/7340/7380 Compact Baths
  • 6331/73X1 Deep Well Compact Baths
  • 7008/7040/7037/7012/7011 Cold Baths
  • 7009/7108/7015 Resistor Baths
  • 7080 Really Cold Bath
  • 7312 Triple Point of Water Maintenance Bath
  • 9150 Thermocouple Calibration Furnace
  • 9118A Thermocouple Calibration Furnace
  • 590X/591X/592X/594X Fixed Point Cells
  • 1620A Digital Thermometer-Hygrometer
  • 9132/9133 Infrared Calibrators
  • 6109A/7109A Portable Calibration Baths
Ambient Temperature Monitors
  • 1620A Digital Thermometer-Hygrometer

The Fluke Calibration 9938-V5-NS (5437493) MET/TEMP II Temperature Calibration Software enables the user to easily automate the calibration on a wide range of temperature sensors. This software provides a comprehensive temperature calibration solution for testing batches of sensors, calculating characterization coefficients, and printing calibration reports. The user can standardize comparison or fixed point calibrations along with using multiple temperature sources or references in a single test.

Version 5.2 updates the software by offering compatibility with the Microsoft Windows 7, 8, 10, and 11 operating systems. Furthermore, support for the 6109A and 7109A Portable Calibration Baths, 1586A Super-DAQ Precision Temperature Scanner, and multiple COM ports without a SmartSwitch are now included.

Fully Automated, Consistent Sensor Calibration

The 9938-V5-NS fully automates batch calibrations of the user's platinum resistance thermometers (PRTs), thermistor, and thermocouple sensors which frees up time for more important tasks. The user can be confident that results are consistent no matter who performs the job since the software monitors and controls the calibration process.

Test a Broad Workload of Temperature Sensors

The 9938-V5-NS handles a wide range of temperature sensors. This software can calibrate thermocouples, RTDs, SPRTs, thermistors, liquid-in-glass (LIG) bi-metallic thermometers, and connected sensors that cannot be attached to a readout. Virtually any sensor with a resistance or voltage output can be tested with a capacity of up to 100 sensors at a time. These sensors do not have to be the same type for simultaneous testing. The user can select up to 40 temperature points for testing their sensors.

Multiply Lab Productivity

Manual temperature sensor calibration is prone to errors and extremely time consuming. This manual process takes roughly four hours to calibrate a sensor at three points, then another hour for paperwork to document the temperature data and to create the certificate. Additionally, the results may vary depending on the technician doing the calibration.

With the 9938-V5-NS software, simply place the test sensors in a heat source, connect them to a temperature readout, enter the setup information, and start the test. Later print out the reports, sign them, and ship the sensors back to the customer for a fast turnaround. Rather than spending hours handling temperature sensor calibration manually, the 9938-V5-NS allows for consistent and repeatable measurements in just minutes.

Proven, Trusted Calibration Software

The 9938-V5-NS is an updated version of trusted, well-known software that easily connects to the user's Fluke Calibration equipment. This software is trusted by hundred of customers worldwide for use in calibration labs. The version 5.2 update maintains the structure and work flow with added improvements.

Easy to Learn, Easy to Use

The 9938-V5-NS's user interface guides the user through configuring and running a calibration test, calculating sensor coefficients, and preparing a report of calibration. Calibration professionals of all levels can easily learn and benefit from the time saving features of this software.

Choice of Calibration Method-- Comparison, Fixed-Point, or Mixed

The user may calibrate most of their secondary standard sensors against a reference sensor or against calibrated heat sources. For users who need a higher level of accuracy than what comparison calibration can give them, the 9938-V5-NS is the solution. The 9938-V5-NS software can calibrate the user's secondary standard or primary standard sensors using fixed-point cells. The software also lets the user combine comparison and fixed-point cell measurements during the same calibration. A triple-point of water measurement before or after comparison points can also be conducted.

Heat Source Calibrations

Additionally, the 9938-V5-NS software can perform heat source calibrations for Fluke Calibration Dry-Wells and Micro-Baths (not included).

Support for Many Test Equipment Configurations

Calibrations can be performed using a variety of digital thermometer readouts-- from handhelds to high-precision bench-top models (not included). An assortment of heat sources including dry-wells, Metrology Wells, Micro Baths, calibration baths, and furnaces (not included) can also be used.

Automatically Log Ambient Conditions

The 9938-V5-NS software can log ambient temperature and humidity automatically during calibration using the 1620A 'DewK' Thermo-Hygrometer (not included).

Asset Management

The 9938-V5-NS software maintains all test equipment information and calibration status in a database. Unit Under Test (UUT) sensor information along with customer names and addresses, which are used when printing reports, are also maintained. This software can also export data to be added to a work order in Fluke MET/TEAM (not included).

Coefficient Calculation for Many Sensor Types

The coefficients and tables utility calculates characterization coefficients for PRT, thermistor, and thermocouple probes. The types of coefficients that can be calculated are ITS-90, IPTS-68, Callendar-Van Dusen, and polynomial functions for PRTs, polynomial for thermistors, and coefficients for thermocouple types B, E, J, K, N, R, S, T, and AuPt. Characterization coefficients and test data acquired by the software can be exported to a text file.

Data Quality Check

If concerns about the quality of the data acquired from a questionable sensor arise, the 9938-V5-NS software can help. The coefficients and tables utility calculates residuals at each set-point to give the user an indication of the quality of the data used to characterize the sensor.

Interpolation Tables

After the user has characterized a sensor, they can generate temperature versus resistance, temperature versus ratio, or temperature versus voltage interpolation tables using the calculated characterization coefficients. Interpolation tables can be printed as part of the report of calibration or exported to a delimited ASCII text file for importing into other analysis software.

ANSI/NCSL Compliant Report of Calibration

The 9938-V5-NS software produces reports of calibration that are compliant to ANSI/NCSL Z540.3.

More Information
BrandFluke Calibration
ConditionNEW
  • 1 - MET/TEMP II Software CD/License
  • 1 - RS-232 Data Cable
  • 1 - USB to RS-232 Adapter