Fluke Calibration P3830-MPA
High Pressure Hydraulic Deadweight Tester, 4 to 200 MPa
Fluke Calibration P3830-MPA
High Pressure Hydraulic Deadweight Tester, 4 to 200 MPa
- Range: 4 to 200 MPa
- Nominal increments: MPa
- Accuracy: 0.02% of reading
- Range: 4 to 200 MPa
- Nominal increments: MPa
- Accuracy: 0.02% of reading
- Test port adaptors: 3/4 16 UNF; 9/16 in. - 18 UNF (Autoclave); 3/8 in. BSP; 1/2 in. BSP; and 3/4 in. BSP
- ISO/IEC 17025 accredited calibration certificate standard
- PressCal software
The Fluke Calibration P3830MPA High Pressure Hydraulic Deadweight Tester, 4 to 200 MPa is the culmination of over 50 years experience in the design and manufacture of primary pressure standards. With features and options designed to improve accuracy, increase reliability, and simplify operation, the P3830-MPA can be used to calibrate virtually any high pressure sensing device including transducers, transmitters, gauges or pressure switches.
Instrument Base
The Instrument base includes all items required for operation. A high quality hand pump is coupled to a 7 to 1 intensifier, allowing the operator to easily generate high pressure in the system. An oil reservoir is included so that the pump can be recharged when calibrating large volume devices. A Test Station is provided for connecting the Device under Test to the P3830-MPA. Adjustable feet and the level vial allow the operator to ensure that the instrument is level, in order to achieve the ultimate performance. A Piston Float Reference allows the operator to determine when the piston is in the ideal, "mid float" position.
Piston/Cylinder
The piston/cylinder is the "heart" of the deadweight tester. P3830-MPA pistons are manufactured from tungsten carbide which provides excellent long term stability, durability, and extremely low coefficients for temperature and pressure.
Weight Sets
Standard weight masses are series 3 non-magnetic stainless steel. Each mass is marked with the serial number of the instrument and the nominal pressure value. PressCal software can be used to support additional pressure units.
Gravity Correction
Gravity varies significantly with geographical locations. Each instrument can be calibrated to local gravity at no additional cost. If unspecified, instruments are calibrated to standard gravity at 980.665 cm/s2.
Country of Origin | United States |
---|---|
Brand | Fluke Calibration |
Catalog | 4185582 |
Condition | NEW |
UPC | 095969638630 |
Vendor Alias | P3830-MPA |