Fluke Calibration P5510/15-2700G-4/C
Pneumatic/Hydraulic Comparison Test Pumps (P5510/P5515) with Accreditation and 4 Gauges
Fluke Calibration P5510/15-2700G-4/C
Pneumatic/Hydraulic Comparison Test Pumps (P5510/P5515) with Accreditation and 4 Gauges
- Brand Name: Fluke Calibration
- UPC: 095969671880
- Condition: NEW
- Country of Origin: United States
- Comes with 4 pressure gauges and accreditation
P5510
- Pressure range: 0 to 300 psi (2 MPa)
- Vacuum range: 0 in to 27 in Hg (915 mbar 90% vacuum)
- Test port adapters: M20 x 1.5, M14 x 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter)
- Dual pressure/vacuum capability
- Bench mount design
- Built-in handpump as pressure/vacuum source
- High quality needle valve for fine control
- Test port adapters do not require PTFE tape or wrenches
P5515
- Pressure range: 0 to 20000 psi (140 MPa)
- Test port adapters: M20 x 1.5, M14 x 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter)
- Reservoir volume: 150 cm3 (9.2 in3)
- Screw press displacement: 5.5 cm3 (0.34 in3)
- Priming pump displacement: 4.7 cm3 (0.293 in) per stroke
- Built-in pump for large volume applications and system priming
- High quality screw press for fine pressure control
- Acrylic reservoir for visibility of fluid level and quality
- Test connections can be made without need for PTFE tape or wrenches
- Built-in drain plug for removal of old fluid
- Sturdy carrying case with lid
- Compatible with wide range of fluids, including sebacate, mineral oil, and distilled water
2700G-G70M
- Range: 0 to 10 000 psi (0 to 70 MPa)
- Resolution: 1 psi (0.01 bar)
- Burst pressure: 15000 psi (100 MPa)
- Media compatibility: Any non-flammable, non-toxic, non-explosive, non-oxidizing liquid or gas compatible with 316 stainless steel
- Accuracy: to 0.02% of full scale
- Pressure connection: 1/4 in. NPT Male
- Easy-to-use, rugged construction for reliable performance
- For use with 700PTPK or 700HTPK Pump Kits for complete, portable pressure testing solution (up to 4 MPa/600 psi with PTP-1 pneumatic pump; up to 70 MPa/10000 psi with HTP-2 hydraulic pump)
- For use with P5510, P5513, P5514, or P5515 Comparison Test Pumps for complete bench top pressure calibration solution
2700G-BG7M
- Range: -12 to 1000 psi (-80 kPa to 7 MPa)
- Resolution: 0.1 psi (0.001 bar)
- Burst pressure: 10000 psi (70 MPa)
- Media compatibility: Any liquids or gases compatible with 316 stainless steel
- Accuracy: to 0.02% of full scale
- Pressure connection: 1/4 in. NPT Male
- Easy-to-use, rugged construction for reliable performance
- For use with 700PTPK or 700HTPK Pump Kits for complete, portable pressure testing solution (up to 4 MPa/600 psi with PTP-1 pneumatic pump; up to 70 MPa/10000 psi with HTP-2 hydraulic pump)
- For use with P5510, P5513, P5514, or P5515 Comparison Test Pumps for complete bench top pressure calibration solution
2700G-BG2M
- Range: -12 to 300 psi (-80 kPa to 2 MPa)
- Resolution: 0.01 psi (0.0001 bar)
- Burst pressure: 2000 psi (14 MPa)
- Media compatibility: Any liquids or gases compatible with 316 stainless steel
- Accuracy: to 0.02% of full scale
- Pressure connection: 1/4 in. NPT Male
- Easy-to-use, rugged construction for reliable performance
- For use with 700PTPK or 700HTPK Pump Kits for complete, portable pressure testing solution (up to 4 MPa/600 psi with PTP-1 pneumatic pump; up to 70 MPa/10000 psi with HTP-2 hydraulic pump)
- For use with P5510, P5513, P5514, or P5515 Comparison Test Pumps for complete bench top pressure calibration solution
2700G-BG200K
- Range: -15 to 30 psi (-100 to 200 kPa)
- Resolution: 0.001 psi (0.0001 bar)
- Burst pressure: 90 psi (0.6 MPa)
- Media compatibility: Any clean, dry non-corrosive gas
- Accuracy: to 0.02% of full scale
- Pressure connection: 1/4 in. NPT Male
- Easy-to-use, rugged construction for reliable performance
- For use with 700PTPK or 700HTPK Pump Kits for complete, portable pressure testing solution (up to 4 MPa/600 psi with PTP-1 pneumatic pump; up to 70 MPa/10000 psi with HTP-2 hydraulic pump)
- For use with P5510, P5513, P5514, or P5515 Comparison Test Pumps for complete bench top pressure calibration solution
The Fluke Calibration P5510/15-2700G-4/C features Accreditation, the P5510-2M Pneumatic Comparison Test Pump, the P5515-140M Hydraulic Comparison Test Pump, and the 2700G-G70M, 2700G-BG7M, 2700G-BG2M, 2700G-BG200K Reference Pressure Gauges.
P5510-2M
The Fluke Calibration P5510-2M Pneumatic Comparison Test Pump, 2 MPa (300 psi)/27 inHg (915 mbar 90% Vacuum) is designed for testing pressure measuring instruments against master test instruments. This cost-effective instruments provides precise control for important calibration requirements and includes many features found in Fluke Calibration's popular line of pneumatic deadweight testers.
P5515-140M
The Fluke Calibration P5515-140M Hydraulic Comparison Test Pump with Viton Seals, 140 MPa (20000 psi) is used for checking pressure measuring instruments against master test gauges, indicators or transducers. This cost-effective instrument, which includes several features from Fluke Calibration's popular line of hydraulic deadweight testers, is capable of easily generating high pressures and provides precise control for important calibration requirements.
2700G-G70M
The Fluke Calibration 2700GG70M Reference Pressure Gauge, 0 to 10,000 psi (0 to 70 MPa) provides best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. The Fluke Calibration 2700G-G70M Pressure Gauge is ideal for calibrating pressure measurement devices such as pressure gauges, transmitters, transducers, and switches. In addition, the Fluke Calibration 2700G-G70M can be used as a check standard or to provide process measurements with data logging.
The 2700G-G70M has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one, custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked through the supervisor menu.
The 2700G-G70M Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the Fluke Calibration P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.
2700G-BG7M
The Fluke Calibration 2700GBG7M Reference Pressure Gauge, -12 to 1000 psi (-80 kPa to 7 MPa) provides best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. The Fluke Calibration 2700G-BG7M Pressure Gauge is ideal for calibrating pressure measurement devices such as pressure gauges, transmitters, transducers, and switches. In addition, the Fluke Calibration 2700G-BG7M can be used as a check standard or to provide process measurements with data logging.
The 2700G-BG7M has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one, custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked through the supervisor menu.
The 2700G-BG7M Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the Fluke Calibration P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.
2700G-BG2M
The Fluke Calibration 2700GBG2M Reference Pressure Gauge, -12 to 300 psi (-80 kPa to 2 MPa) provides best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. The Fluke Calibration 2700G-BG2M Pressure Gauge is ideal for calibrating pressure measurement devices such as pressure gauges, transmitters, transducers, and switches. In addition, the Fluke Calibration 2700G-BG2M can be used as a check standard or to provide process measurements with data logging.
The 2700G-BG2M has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one, custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked through the supervisor menu.
The 2700G-BG2M Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the Fluke Calibration P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.
2700G-BG200K
The Fluke Calibration 2700GBG200K Reference Pressure Gauge, -15 to 30 psi (-100 to 200 kPa) provides best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. The Fluke Calibration 2700G-BG200K Pressure Gauge is ideal for calibrating pressure measurement devices such as pressure gauges, transmitters, transducers, and switches. In addition, the Fluke Calibration 2700G-BG200K can be used as a check standard or to provide process measurements with data logging.
The 2700G-BG200K has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one, custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked through the supervisor menu.
The 2700G-BG200K Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the Fluke Calibration P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.
Country of Origin | United States |
---|---|
Brand | Fluke Calibration |
Catalog | 4341824 |
Condition | NEW |
UPC | 095969671880 |
Vendor Alias | P5510/15-2700G-4/C |
- 1 - Comparison Test Pump (P5510)
- 1 - Comparison Test Pump (P5515)
- 4 - Test Gauges
- 1 - Certificate of Accreditation