Fluke Calibration P5515-2700G-1/C
Hydraulic Comparison Test Pump with Accreditation and 1 Gauge, 140 MPa (20000 psi)
Fluke Calibration P5515-2700G-1/C
Hydraulic Comparison Test Pump with Accreditation and 1 Gauge, 140 MPa (20000 psi)
- Comes with 1 pressure gauge and accreditation
- P5515
- Pressure range: 0 to 20000 psi (140 MPa)
- Comes with 1 pressure gauge and accreditation
P5515
- Pressure range: 0 to 20000 psi (140 MPa)
- Test port adapters: M20 x 1.5, M14 x 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter)
- Reservoir volume: 150 cm3 (9.2 in3)
- Screw press displacement: 5.5 cm3 (0.34 in3)
- Priming pump displacement: 4.7 cm3 (0.293 in) per stroke
- Built-in pump for large volume applications and system priming
- High quality screw press for fine pressure control
- Acrylic reservoir for visibility of fluid level and quality
- Test connections can be made without need for PTFE tape or wrenches
- Built-in drain plug for removal of old fluid
- Sturdy carrying case with lid
- Compatible with wide range of fluids, including sebacate, mineral oil, and distilled water
2700G-G70M
- Range: 0 to 10 000 psi (0 to 70 MPa)
- Resolution: 1 psi (0.01 bar)
- Burst pressure: 15000 psi (100 MPa)
- Media compatibility: Any non-flammable, non-toxic, non-explosive, non-oxidizing liquid or gas compatible with 316 stainless steel
- Accuracy: to 0.02% of full scale
- Pressure connection: 1/4 in. NPT Male
- Easy-to-use, rugged construction for reliable performance
- For use with 700PTPK or 700HTPK Pump Kits for complete, portable pressure testing solution (up to 4 MPa/600 psi with PTP-1 pneumatic pump; up to 70 MPa/10000 psi with HTP-2 hydraulic pump)
- For use with P5510, P5513, P5514, or P5515 Comparison Test Pumps for complete bench top pressure calibration solution
The Fluke Calibration P5515-2700G-1/C features Accreditation, the P5515-140M Hydraulic Comparison Test Pump, and the 2700G-G70M Reference Pressure Gauge.
P5515-140M
The Fluke Calibration P5515-140M Hydraulic Comparison Test Pump with Viton Seals, 140 MPa (20000 psi) is used for checking pressure measuring instruments against master test gauges, indicators or transducers. This cost-effective instrument, which includes several features from Fluke Calibration's popular line of hydraulic deadweight testers, is capable of easily generating high pressures and provides precise control for important calibration requirements.
2700G-G70M
The Fluke Calibration 2700GG70M Reference Pressure Gauge, 0 to 10,000 psi (0 to 70 MPa) provides best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. The Fluke Calibration 2700G-G70M Pressure Gauge is ideal for calibrating pressure measurement devices such as pressure gauges, transmitters, transducers, and switches. In addition, the Fluke Calibration 2700G-G70M can be used as a check standard or to provide process measurements with data logging.
The 2700G-G70M has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one, custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked through the supervisor menu.
The 2700G-G70M Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the Fluke Calibration P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.
Country of Origin | United States |
---|---|
Brand | Fluke Calibration |
Catalog | 4341739 |
Condition | NEW |
UPC | 095969671798 |
Vendor Alias | P5515-2700G-1/C |
- 1 - Comparison Test Pump (P5515)
- 1 - Test Gauge
- 1 - Certificate of Accreditation