Fluke IB875K
Industrial Digital Multimeter (87V) and Insulated Hand Tools Starter Kit (IKST7)
Fluke IB875K
Industrial Digital Multimeter (87V) and Insulated Hand Tools Starter Kit (IKST7)
The Fluke IB875K kit includes Fluke's 87V True-RMS Industrial Digital Multimeter and Fluke's IKST7 Insulated Hand Tools Starter Kit.
- 87V: TRMS AC voltage and current; accurate voltage/frequency measurements on adjustable speed motor drives/other noisy equipment; built-in thermometer; up to 1000 VAC/DC; up to 10 A, 20 A
- IKST7: Designed to block potentially hazardous voltages; subjected to 10,000 V dielectric strength test; certified to 1,000 VAC/1,500 VDC by VDE
87V Industrial Digital Multimeter Features:
- True RMS AC voltage and current for accurate measurements on non linear signals
- Backlit keypad buttons
- Large, 2-level, bright white, backlit display
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 VAC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- "Classic" design with new removable holster with built in test lead and probe storage
IKST7 Insulated Hand Tool Kit Features:
- Designed to block potentially hazardous voltages from reaching you
- Subjected to a 10,000 V dielectric strength test, protection protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab)
- Comply to international standards such as IEC 60900 and ASTM F1505
- Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation
- Critical protective component between you and unplanned incident
Insulated Screwdrivers
- Ergonomic handle that adapts to user's hand, causes less strain and work fatigue and provides maximum torque
- Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design
- Slim insulated shaft allows access in hard-to-reach areas
- Manufactured from CMV steel for superior durability
- IPHS1 Phillips Screwdriver
- Size: #1
- Blade length: 3 in., 75 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 7/32 in., 5.5 mm
- IPHS2 Phillips Screwdriver
- Size: #2
- Blade length: 4 in., 100 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
- ISLS3 Slotted Screwdriver
- Blade length: 3 in., 75 mm
- Handle length: 3 3/8 in., 86 mm
- Shaft diameter: 3/32 in., 2.5 mm
- ISLS5 Slotted Screwdriver
- Blade length: 4 in., 100 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 5/32 in., 4 mm
- ISLS8 Slotted Screwdriver
- Blade length: 5 in., 125 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
Insulated Pliers
- INCP8 Insulated Lineman's Combination Pliers
- Nominal length: 8 in., 200 mm
- Secure hold by aggressive serrated jaws and 4-point gripping hole
- Slim shape for better access to wires in tight spaces
- Powerful gripping jaw, yet very light
- INDC8 Insulated High Leverage Diagonal Cutter
- Nominal length: 8 in., 200 mm
- Cuts hard materials including steel and piano wire
- Power joint and precision cutting edges
- INLP8 Insulated Long Nose Pliers
- Nominal length: 8 in., 200 mm
- Unique milled wave pattern gripping zones
- 4 gripping points for pulling round objects with superior grip that will not slip
- Straight, half-round, long and slim knurled jaws, specially profiled
- Side cutting edge for wire cutting
RUP8 Roll-up Tool Pouch
- Space for up to 3 pliers and 5 screwdrivers
- Rolls shut
- Closes with hook and loop fastener
The Fluke IB875K features the 87V True-RMS Industrial Digital Multimeter with Temperature Measurement, which is the right choice when productivity is on the line and you need to solve problems fast. This instrument delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V allows you to gain productivity by taking the guesswork out of drive system troubleshooting, even in loud, high energy, and high altitude locations.
The IB875K also features IKST7 Insulated Hand Tools. These tools will always feel right, from the moment you first put them in your hand, you're ready to go to work. These screwdrivers give you maximum torque and a comfortable grip that reduces fatigue, while the pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.
Safety is critical when working with electricity. Follow the right procedures. Wear the proper clothes. Use eye and hearing protection. And make sure you use the right tools.
It is always best practice to work on deenergized equipment. But sometimes that is just not possible. Wiring changes made by someone else may provide an unplanned energy path to where you are working. You need to take every precaution you can. That means using high quality insulated hand tools.
Most hand tools have rubber or plastic on the handles. That's not the same as offering protection from electric shock, and limiting the possibility of arc faults due to short circuits. That is what makes insulated tools different.
Why Fluke Insulated Hand Tools?
Fluke is the world leader in handheld test tools. Everything that you know about Fluke multimeters, clamp meters and electrical test tools applies to our insulated hand tools--forged from German steel, these rugged hand tools are built to last a lifetime.
Country of Origin | Germany |
---|---|
Brand | Fluke |
Catalog | 5067419 |
Condition | NEW |
UPC | 095969905275 |
Vendor Alias | IB875K |
- 1 - Industrial Digital Multimeter
- 1 - Insulated Long Nose with Side Cutter, 8 in., 200 mm, 1000 V
- 1 - Insulated High Leverage Diagonal Cutter, 8 in., 200 mm, 1000 V
- 1 - Insulated Lineman Combination Pliers, 8 in., 200 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 3/32x3 in., 2.5 mm x 75 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 5/32x4 in., 4 mm x 100 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 1/4x5 in., 6 mm x 125 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #1, 3 in., 75 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #2, 4 in., 100 mm, 1000 V
- 1 - Roll-up Pouch