Fluke IBT6K
Electrical Tester (T6-1000) and Insulated Hand Tools Starter Kit (IKST7)
Fluke IBT6K
Electrical Tester (T6-1000) and Insulated Hand Tools Starter Kit (IKST7)
The Fluke IBT6K kit includes Fluke's T6-1000 Electrical Tester and Fluke's IKST7 Insulated Hand Tools Starter Kit.
- T6-1000: FieldSense technology measures voltage without making electrical contact to live voltage (does NOT perform DC measurements; measure voltage and current simultaneously; measure in tight spaces
- IKST7: Designed to block potentially hazardous voltages; subjected to 10,000 V dielectric strength test; certified to 1,000 VAC/1,500 VDC by VDE
T6-1000 Electrical Tester Features:
- FieldSense technology for AC voltage, current and frequency measures voltage without making electrical contact to live voltage *
- *FieldSense does NOT perform DC measurements
- Measure voltage and current simultaneously
- Measure in tight spaces by not needing to use test leads
- Save time by taking measurements without needing to remove covers and wire nuts
- Make measurements with one hand, reducing risk
- Simultaneous voltage and current display shows all power supply measurements at glance for efficient troubleshooting
- 1 to 1000V AC or DC*
- 0.1 to 200A AC
- Resistance 1 Ω to 100 kΩ
- Frequency measurement 45 Hz to 66 Hz
- Works with wires up to AWG 4/0 (120 mm2) with a 17.8 mm jaw opening
- HOLD button temporarily freezes reading for easy viewing
- Easy to read display with backlight
- Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
- Measures on wires up to AWG 4/0 (120 mm2), carrying as much as 200A
- *FieldSense does NOT perform DC measurements
IKST7 Insulated Hand Tool Kit Features:
- Designed to block potentially hazardous voltages from reaching you
- Subjected to a 10,000 V dielectric strength test, protection protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab)
- Comply to international standards such as IEC 60900 and ASTM F1505
- Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation
- Critical protective component between you and unplanned incident
Insulated Screwdrivers
- Ergonomic handle that adapts to user's hand, causes less strain and work fatigue and provides maximum torque
- Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design
- Slim insulated shaft allows access in hard-to-reach areas
- Manufactured from CMV steel for superior durability
- IPHS1 Phillips Screwdriver
- Size: #1
- Blade length: 3 in., 75 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 7/32 in., 5.5 mm
- IPHS2 Phillips Screwdriver
- Size: #2
- Blade length: 4 in., 100 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
- ISLS3 Slotted Screwdriver
- Blade length: 3 in., 75 mm
- Handle length: 3 3/8 in., 86 mm
- Shaft diameter: 3/32 in., 2.5 mm
- ISLS5 Slotted Screwdriver
- Blade length: 4 in., 100 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 5/32 in., 4 mm
- ISLS8 Slotted Screwdriver
- Blade length: 5 in., 125 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
Insulated Pliers
- INCP8 Insulated Lineman's Combination Pliers
- Nominal length: 8 in., 200 mm
- Secure hold by aggressive serrated jaws and 4-point gripping hole
- Slim shape for better access to wires in tight spaces
- Powerful gripping jaw, yet very light
- INDC8 Insulated High Leverage Diagonal Cutter
- Nominal length: 8 in., 200 mm
- Cuts hard materials including steel and piano wire
- Power joint and precision cutting edges
- INLP8 Insulated Long Nose Pliers
- Nominal length: 8 in., 200 mm
- Unique milled wave pattern gripping zones
- 4 gripping points for pulling round objects with superior grip that will not slip
- Straight, half-round, long and slim knurled jaws, specially profiled
- Side cutting edge for wire cutting
RUP8 Roll-up Tool Pouch
- Space for up to 3 pliers and 5 screwdrivers
- Rolls shut
- Closes with hook and loop fastener
The Fluke IBT6K features the T6-1000 Electrical Tester with FieldSense Technology, 1000V, which lets you measure voltage the same way that you measure current, without test lead contact to live voltage. Just slide the open jaw over a conductor and see the voltage level. Much more than just a voltage detector, these new testers give you a reliable voltage and current measurement, without test leads and without contacting a bare, metal conductor.
The T6-1000 allows electricians to test where it used to be impossible. Instead of pulling wire nuts, just slide the open jaw over a single conductor. This is much faster and safer than working to find a metallic contact point. Plus, voltage and current measurements can be made at the same time.
The T6-1000 measures and displays both voltage and current simply by sliding the open jaw over the conductor.
Not having to probe live conductors also makes jobs safer. Since there is no need to make electrical contact, the chance of human contact with an energized wire is greatly reduced. This also reduces the chance of making contact with the wrong conductor, which can produce unexpected results.
The IBT6K also features IKST7 Insulated Hand Tools. These tools will always feel right, from the moment you first put them in your hand, you're ready to go to work. These screwdrivers give you maximum torque and a comfortable grip that reduces fatigue, while the pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.
Safety is critical when working with electricity. Follow the right procedures. Wear the proper clothes. Use eye and hearing protection. And make sure you use the right tools.
It is always best practice to work on deenergized equipment. But sometimes that is just not possible. Wiring changes made by someone else may provide an unplanned energy path to where you are working. You need to take every precaution you can. That means using high quality insulated hand tools.
Most hand tools have rubber or plastic on the handles. That's not the same as offering protection from electric shock, and limiting the possibility of arc faults due to short circuits. That is what makes insulated tools different.
Why Fluke Insulated Hand Tools?
Fluke is the world leader in handheld test tools. Everything that you know about Fluke multimeters, clamp meters and electrical test tools applies to our insulated hand tools--forged from German steel, these rugged hand tools are built to last a lifetime.
Country of Origin | United States |
---|---|
Brand | Fluke |
Catalog | 5067404 |
Condition | NEW |
UPC | 095969905268 |
Vendor Alias | IBT6K |
- 1 - Electrical Tester
- 1 - Insulated Long Nose with Side Cutter, 8 in., 200 mm, 1000 V
- 1 - Insulated High Leverage Diagonal Cutter, 8 in., 200 mm, 1000 V
- 1 - Insulated Lineman Combination Pliers, 8 in., 200 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 3/32x3 in., 2.5 mm x 75 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 5/32x4 in., 4 mm x 100 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 1/4x5 in., 6 mm x 125 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #1, 3 in., 75 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #2, 4 in., 100 mm, 1000 V
- 1 - Roll-up Pouch