Fluke IKSC7
7 Piece Insulated Screwdriver Kit
The Fluke IKSC7 is a 7-Piece Insulated Screwdriver Kit that will always feel right. These screwdrivers give users maximum torque and a comfortable grip reducing fatigue. This kit takes everything that makes Fluke test tools great, and puts it into a 7-piece kit.
- Designed to block potentially hazardous voltages
- Subjected to a 10,000 V dielectric strength test, protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE
- Designed to block potentially hazardous voltages from reaching you
- Subjected to a 10,000 V dielectric strength test, protection protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab)
- Comply to international standards such as IEC 60900 and ASTM F1505
- Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation
- Critical protective component between you and unplanned incident
- Insulated Screwdrivers
- Ergonomic handle that adapts to user's hand, causes less strain and work fatigue and provides maximum torque
- Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design
- Slim insulated shaft allows access in hard-to-reach areas
- Manufactured from CMV steel for superior durability
- IPHS1 Phillips Screwdriver
- Size: #1
- Blade length: 3 in., 75 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 7/32 in., 5.5 mm
- IPHS2 Phillips Screwdriver
- Size: #2
- Blade length: 4 in., 100 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
- ISLS3 Slotted Screwdriver
- Blade length: 3 in., 75 mm
- Handle length: 3 3/8 in., 86 mm
- Shaft diameter: 3/32 in., 2.5 mm
- ISLS5 Slotted Screwdriver
- Blade length: 4 in., 100 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 5/32 in., 4 mm
- ISLS8 Slotted Screwdriver
- Blade length: 5 in., 125 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
- ISQS1 Square-head Screwdriver
- Size: SQ1
- Blade length: 4 in., 100 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 5/32 in., 4 mm
- ISQS2 Square-head Screwdriver
- Size: SQ2
- Blade length: 5 in., 125 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
The Fluke IKSC7 7 Piece Insulated Screwdriver Kit will always feel right. From the moment you first put these tools in your hand, you're ready to go to work. These screwdrivers give you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.
Safety is critical when working with electricity. Follow the right procedures. Wear the proper clothes. Use eye and hearing protection. And make sure you use the right tools.
It is always best practice to work on deenergized equipment. But sometimes that is just not possible. Wiring changes made by someone else may provide an unplanned energy path to where you are working. You need to take every precaution you can. That means using high quality insulated hand tools, like the IKSC7.
Most hand tools have rubber or plastic on the handles. That's not the same as offering protection from electric shock, and limiting the possibility of arc faults due to short circuits. That is what makes insulated tools different.
Why Fluke Insulated Hand Tools?
Fluke is the world leader in handheld test tools. Everything that you know about Fluke multimeters, clamp meters and electrical test tools applies to our insulated hand tools--forged from German steel, these rugged hand tools are built to last a lifetime.
Country of Origin | Germany |
---|---|
Brand | Fluke |
Catalog | 5067345 |
Condition | NEW |
UPC | 095969905220 |
Vendor Alias | IKSC7 |
- 1 - Insulated Slotted Screwdriver 3/32x3 in., 2.5 mm x 75 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 5/32x4 in., 4 mm x 100 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 1/4x5 in., 6 mm x 125 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #1, 3 in., 75 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #2, 4 in., 100 mm, 1000 V
- 1 - Insulated Squared Screwdriver #1, 4 in, 100 mm, 1000 V
- 1 - Insulated Squared Screwdriver #2, 5 in., 125 mm, 1,000 V