Fluke IKST7
Insulated Hand Tools Starter Kit with Five (5) Insulated Screwdrivers and Three (3) Insulated Pliers
IKST7
IKST7
Fluke IKST7
Insulated Hand Tools Starter Kit with Five (5) Insulated Screwdrivers and Three (3) Insulated Pliers
IKST7
IKST7
The Fluke IKST7 is an Insulated Hand Tools Starter Kit with Five (5) Insulated Screwdrivers and Three (3) Insulated Pliers that will always feel right. Everything that makes Fluke test tools great, put into an insulated hand tool - that is what users will have on their toolbelt.
- Designed to block potentially hazardous voltages from reaching
- Subjected to a 10,000 V dielectric strength test, protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE
- Designed to block potentially hazardous voltages from reaching you
- Subjected to a 10,000 V dielectric strength test, protection protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab)
- Comply to international standards such as IEC 60900 and ASTM F1505
- Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation
- Critical protective component between you and unplanned incident
Insulated Screwdrivers
- Ergonomic handle that adapts to user's hand, causes less strain and work fatigue and provides maximum torque
- Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design
- Slim insulated shaft allows access in hard-to-reach areas
- Manufactured from CMV steel for superior durability
- IPHS1 Phillips Screwdriver
- Size: #1
- Blade length: 3 in., 75 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 7/32 in., 5.5 mm
- IPHS2 Phillips Screwdriver
- Size: #2
- Blade length: 4 in., 100 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
- ISLS3 Slotted Screwdriver
- Blade length: 3 in., 75 mm
- Handle length: 3 3/8 in., 86 mm
- Shaft diameter: 3/32 in., 2.5 mm
- ISLS5 Slotted Screwdriver
- Blade length: 4 in., 100 mm
- Handle length: 3 11/16 in., 94 mm
- Shaft diameter: 5/32 in., 4 mm
- ISLS8 Slotted Screwdriver
- Blade length: 5 in., 125 mm
- Handle length: 4 3/16 in., 106 mm
- Shaft diameter: 1/4 in., 6 mm
Insulated Pliers
- INCP8 Insulated Lineman's Combination Pliers
- Nominal length: 8 in., 200 mm
- Secure hold by aggressive serrated jaws and 4-point gripping hole
- Slim shape for better access to wires in tight spaces
- Powerful gripping jaw, yet very light
- INDC8 Insulated High Leverage Diagonal Cutter
- Nominal length: 8 in., 200 mm
- Cuts hard materials including steel and piano wire
- Power joint and precision cutting edges
- INLP8 Insulated Long Nose Pliers
- Nominal length: 8 in., 200 mm
- Unique milled wave pattern gripping zones
- 4 gripping points for pulling round objects with superior grip that will not slip
- Straight, half-round, long and slim knurled jaws, specially profiled
- Side cutting edge for wire cutting
RUP8 Roll-up Tool Pouch
- Space for up to 3 pliers and 5 screwdrivers
- Rolls shut
- Closes with hook and loop fastener
The Fluke IKST7 Insulated Hand Tools Starter Kit with Five (5) Insulated Screwdrivers and Three (3) Insulated Pliers will always feel right. From the moment you first put these tools in your hand, you're ready to go to work. These screwdrivers give you maximum torque and a comfortable grip that reduces fatigue, while the pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.
Safety is critical when working with electricity. Follow the right procedures. Wear the proper clothes. Use eye and hearing protection. And make sure you use the right tools.
It is always best practice to work on deenergized equipment. But sometimes that is just not possible. Wiring changes made by someone else may provide an unplanned energy path to where you are working. You need to take every precaution you can. That means using high quality insulated hand tools, like the IKST7.
Most hand tools have rubber or plastic on the handles. That's not the same as offering protection from electric shock, and limiting the possibility of arc faults due to short circuits. That is what makes insulated tools different.
Why Fluke Insulated Hand Tools?
Fluke is the world leader in handheld test tools. Everything that you know about Fluke multimeters, clamp meters and electrical test tools applies to our insulated hand tools--forged from German steel, these rugged hand tools are built to last a lifetime.
| Country of Origin | Germany |
|---|---|
| Brand | Fluke |
| Condition | NEW |
- 1 - Insulated Long Nose with Side Cutter, 8 in., 200 mm, 1000 V
- 1 - Insulated High Leverage Diagonal Cutter, 8 in., 200 mm, 1000 V
- 1 - Insulated Lineman Combination Pliers, 8 in., 200 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 3/32x3 in., 2.5 mm x 75 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 5/32x4 in., 4 mm x 100 mm, 1000 V
- 1 - Insulated Slotted Screwdriver 1/4x5 in., 6 mm x 125 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #1, 3 in., 75 mm, 1000 V
- 1 - Insulated Phillips Screwdriver #2, 4 in., 100 mm, 1000 V
- 1 - Roll-up Pouch
