Fluke Networks FQM-100-M-VFL
Fiber QuickMap Multimode Fiber Distance & Fault Locator with VisiFault
FQM100MVFL
FQM-100-M-VFL
4774951
Fluke Networks FQM-100-M-VFL
Fiber QuickMap Multimode Fiber Distance & Fault Locator with VisiFault
FQM100MVFL
FQM-100-M-VFL
4774951
The Fluke Networks FQM100MVFL Fiber QuickMap measures length and identifies high loss events on multimode fiber optic cable. Like an OTDR, a laser sends light pulses through fiber and measures the power and timing of light reflected from high loss connections and splices, and the end of the fiber. VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks.
- Fiber QuickMap
- For multimode fiber, 9/125µm and 62.5/125µm
- Fiber QuickMap
- Works on multimode fiber, 9/125µm and 62.5/125 µm
- 850 nm output wavelength. Measure up to 4,921 feet (1,500 metres) of fiber in seconds
- Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
- Measure and locate high-loss splices
- Locate the end of a fiber
- Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
- Detects live optical signals before it begins testing
- Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
- Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
- Change the Index of Refraction (IOR) to improve fiber length accuracy
- Visible in dark areas. Backlighted display turns off automatically
- Removable SC adapter is easily cleaned
- Optional LC, ST and FT interchangeable adapters are available
- Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
- Rugged construction; vibration and drop tested to 1 meter
- VisiFault Visual Fault Locator
- Locates visual faults including tight bends, breaks and bad connectors
- Accelerates end-to-end fiber checks
- Easily verifies polarity and identifies fibers
The Fluke Networks FQM-100-M-VFL Fiber QuickMap measures length and identify high loss events on multimode fiber optic cable. Like an OTDR, a laser sends light pulses through the fiber and measures the power and timing of light reflected from high loss connections and splices, and the end of the fiber. VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable is not visible or accessible, or when the laser light can’t penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provide graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time and skill to operate.
The FQM100MVFL Fiber QuickMap fills the gap between a VFL and an OTDR. The Fiber QuickMap has the simplicity of a VFL, and provides distance and power information on high losses, breaks, and the end of the fiber. The FQM-100-M-VFL also identifies live fiber.
The FQM-100-M-VFL includes the VisiFault Visual Fault Locator with 2.5 mm universal adapter. Fluke Networks VisiFaultTM Visual Fault Locator (VFL) allows you to diagnose and repair simple fiber link problems. The laser-powered VisiFault Visual Fault Locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. This visual fault locator has a long battery life for hours of use.
| Country of Origin | United States |
|---|---|
| Brand | Fluke Networks |
| Catalog | 4774951 |
| Condition | NEW |
| UPC | 754082137573 |
| Vendor Alias | FQM-100-M-VFL |
- 1 - Screw on interchangeable SC adapter
- 1 - UPC to UPC 2-meter patch cord
- 1 - Carrying case
- 1 - 4-language Quick Reference Guide
- 1 - Safety instruction manual
- 1 - Set of batteries
- 1 - VisiFault Visual Fault Locator with 2.5 mm universal adapter
Customers Also Bought
Fluke Networks MMC-62-SCST Multimode Launch Cable 62.5 µm SC/ST
$345.05 Price $379.99
