Fluke ST120+

One-Button GFCI Socket Tester with Beep Alert

ST120PLUS
ST120+
5310334

Fluke ST120+

One-Button GFCI Socket Tester with Beep Alert

ST120PLUS
ST120+
5310334

The Fluke ST120+ is a One-Button GFCI Socket Tester with Beep Alert that checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart on the front of the tester, users can quickly and easily verify the wiring of an outlet. Able to identify several common wiring errors, it gives users on-the-job confidence.

  • Plug into socket
  • Integrated GFCI test
  • Audible beep when voltage is detected
This product is available for shipping to the US, Canada, and Puerto Rico only.
$21.99
In stock: 6 Units
  • Plug into socket - with bright, easy-to-see LEDs, verify correct wiring or identify common wiring problems in both standard and GFCI outlets
  • Integrated GFCI test - feel secure knowing that GFCI-equipped outlets are functioning properly
  • With handy chart, quickly identify one of six wiring conditions for outlets
  • Eliminate multiple trips back and forth by using beeper to help identify if breakers are switched on or off
  • Audible beeper lets you know anytime voltage is detected
  • Three bright, easy-to-see LED indictors, lets users see one of six wiring scenarios:
    • Correct installation
    • Open ground
    • Open neutral
    • Open hot
    • Hot/neutral reversed
    • Hot/ground reversed
  • Rated operating Voltage: 110 to 125 V AC
  • Wattage: 0.3 W
  • Frequency: 50/60 Hz
  • GFCI test: Yes
  • Indicator lights: 1 red, 2 green LEDs
  • Rating: CAT III 300 V
  • Warranty: Two years

The Fluke ST120+ GFCI socket tester with beeper checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart on the front of the tester, users can quickly and easily verify the wiring of an outlet. Able to identify several common wiring errors, including reversed phase and neutral wires and an open ground, the ST120+ will give users confidence on their next job.

Audible alert helps you work faster, safer

The ST120+ also gives users a unique audible alert anytime voltage is detected. It saves time when trying to identify which circuit breaker is connected to which outlet. The user can plug the socket tester in, walk to the circuit breaker panel, and listen for the beeper to turn off – or on – as they flip the breakers. Once it does, they have found the correct breaker. This saves the user time and money.

When switched on, the integrated beeper can also alert users to hazardous voltage at the outlet, even if the wiring is incorrect. Even while working in an office, hospital or other location where the users does not want to interrupt others, the beeper can be switched off.

One-button GFCI tests

The included GFCI test button on the socket tester allows users to test the operation of GFCI outlets. With a single push, the ST120+ can verify the operation of any GFCI equipped outlet. If the GFCI trips as expected, perfect - the user can move on. If not, it is time for the user tp take a closer look.

More Information
Country of OriginChina
BrandFluke
Catalog5310334
ConditionNEW
UPC195112033586
Vendor AliasST120+

1 - ST120+ One-Button GFCI Socket Tester with Beep Alert