Fluke T130
2-Pole Voltage and Continuity Electrical Tester with LCD Readout, AC/DC 6V to 690V
T130FLUKE
T130
4016961
Fluke T130
2-Pole Voltage and Continuity Electrical Tester with LCD Readout, AC/DC 6V to 690V
T130FLUKE
T130
4016961
The Fluke T130 is a 2-Pole Voltage and Continuity Electrical Tester with an LCD Readout. It is the perfect tool featuring large, easy-to-use buttons, a bright backlit LED indicator/LCD display, display hold function, and clear, audible/vibrating voltage indicator. It is designed for any work situation.
- Dual insulated cable tested to 3x required bend angle
- Switchable load to avoid display of ghost voltages
- Backlit graduated scale and backlit indicators
- Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability
- Switchable load to avoid display of ghost voltages, allowing users to draw more current from circuit under test and avoid trip residual-current devices (RCDs)
- Backlit graduated scale and backlit indicators
- Built in electric flashlight for use in dark areas
- Audio on/off for continuity testing in quiet areas
- Improved probe docking for secure storage
- Phase rotation indicator for 3-phase systems
- Single-pole phase test offers fast identification of live conductors
- Push-on probe tips, probe tip protector and storage accessory
- Low battery indicator
- Backlit LCD digital display
- Continuity test with visual results
- Vibratory indicator under load
- Display hold
- Voltage test
- Indication of polarity
- Rotary field indicator
- Voltage detection with discharged batteries
- Wear indicator test lead wire
- Voltage AC/DC: 6V to 690V
- Continuity: 0 to 400 kΩ
- Frequency: 0 / 40 to 400 Hz
- Phase rotation: 100 V to 690 V
- Response time (LED indicator): < 0.5 s
- 200 kΩ input impedance: Current draw 3,5 mA @ 690 V / Current draw 1,15 mA @ 230 V
- 7k Ω input impedance (with load buttons pressed): Current draw 30 mA @ 230 V
- Safety rating: CAT III 690V / CAT IV 600V
- IP rating: IP64
- Power requirement: 2-AAA batteries
- Warranty: 2 years
The Fluke T130 2-Pole Voltage and Continuity Electrical Tester with LCD Readout, AC/DC 6V to 690V is the perfect tool, with large, easy-to-use buttons, a bright backlit LED indicator and LCD display, display hold, and clear audible and vibrating voltage indicators designed for any work situation.
The T130 two-pole voltage and continuity tester measures voltage, but just as important is alerting users that there is NO voltage present before working on any circuit. Cable assemblies are often where failures occur. The cable on any two-pole voltage and continuity tester is its weakest point - it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place the user at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts its testers through three times what the standard demands, flexing the cable over 150 degrees in each direction.
| Country of Origin | United Kingdom |
|---|---|
| Catalog | 4016961 |
| Vendor Alias | FLUKE-T130 |
| Brand | Fluke |
| Condition | NEW |
| UPC | 095969599696 |
- 1 - 2-Pole Voltage and Continuity Electrical Tester with LCD Readout, AC/DC 6V to 690V
