The Fluke T61000PRV240FS EElectrical Tester/Proving Unit with FieldSense Technology inlcudes T6-1000, which lets you measure voltage the same way that you measure current, without test lead contact to live voltage. Just slide the open jaw over a conductor and see the voltage level. Much more than just a voltage detector, these new testers give you a reliable voltage and current measurement, without test leads and without contacting a bare, metal conductor.

The T6-1000 allows electricians to test where it used to be impossible. Instead of pulling wire nuts, just slide the open jaw over a single conductor. This is much faster and safer than working to find a metallic contact point. Plus, voltage and current measurements can be made at the same time.

The T6-1000 measures and displays both voltage and current simply by sliding the open jaw over the conductor.

Not having to probe live conductors also makes jobs safer. Since there is no need to make electrical contact, the chance of human contact with an energized wire is greatly reduced. This also reduces the chance of making contact with the wrong conductor, which can produce unexpected results.

The Fluke T6-1000/PRV240FS also includes the PRV240FS Proving Unit with FieldSense Technology, which provides a fast, safe and reliable sourcing method to verify that your electrical test tool is operating properly before you conduct any live tests - all without having to make electrical contact. The concept of "Test Before Touch" (TBT) involves testing your test tool against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.