Fluke T6-600/62MAX+/1AC
Electrical Tester with FieldSense Technology and Infared Thermometer
Fluke T6-600/62MAX+/1AC
Electrical Tester with FieldSense Technology and Infared Thermometer
The Fluke T6-600/62MAX+/1AC is a kit that features Fluke's T6-6000 Electrical Tester with FieldSense and Fluke's 62 MAX+ Infrared Thermometer.
- T6-6000: FieldSense technology measures voltage without making electrical contact to live voltage (does NOT perform DC measurements); measure voltage and current simultaneously; measure in tight spaces
- 62 MAX+: Measure -22° to 1202°F; up to +1.0°C or +1.0% of reaching; IP54 rating
T6-600
- FieldSense technology for AC voltage, current and frequency measures voltage without making electrical contact to live voltage*
- Measure voltage and current simultaneously
- Measure in tight spaces by not needing to use test leads
- Save time by taking measurements without needing to remove covers and wire nuts
- Make measurements with one hand, reducing risk
- 600V AC or DC*
- 0.1 to 200A AC
- 1 Ω to 1000 Ω
- Works with wires up to AWG 4/0 (120 mm2) with a 17.8 mm jaw opening
- HOLD button temporarily freezes reading for easy viewing
- Easy to read display with backlight
- Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
- Measures on wires up to AWG 4/0 (120 mm2), carrying as much as 200A
- *FieldSense does NOT perform DC measurements; used attached probes to measure DC voltage
62 MAX+
- Measure -30° to 650°C/-22° to 1202°F
- Up to +1.0°C or +1.0% of reaching
- IP54 rating for water resistance and dust allows you to work in rain or shine and dirty or dusty industrial sites
- Strong enough to withstand 3 m drop
- Small and lightweight; clips to tool belt or belt loop, or easily fits into most tool boxes
- 12:1 distance-to-spot ratio
- Precise laser technology makes for more accurate and repeatable measurements
- Dual lasers help you identify areas to be measured
- Large, backlit display makes data easier to read, even in dark areas
- Displays minimum, maximum or average temperatures, or difference between two measurements
- Alarm: Hi and Lo alarms for rapid display of measurements outside of limits
- Powered by single, standard AA battery
1AC-A1-II
- VoltAlert AC Voltage Tester, 90-1000V AC
- Continually tests its battery and circuit integrity with periodic double flash visual indication, using Fluke Voltbeat technology
- Category IV-1000V overvoltage rated for added user protection
- Voltage sensing ranges: 90V to 1000V AC; 45 Hz to 405 Hz; 24V to 1000V AC control circuit model
- Rugged and reliable
The Fluke T660062MAX1AC Electrical Tester with FieldSense Technology and Infared Thermometer includes T6-6000, which lets you measure voltage the same way that you measure current, without test lead contact to live voltage. Just slide the open jaw over a conductor and see the voltage level. Much more than just a voltage detector, these new testers give you a reliable voltage and current measurement, without test leads and without contacting a bare, metal conductor.
The Fluke T6-600 allows electricians to test where it used to be impossible. Instead of pulling wire nuts, just slide the open jaw over a single conductor. This is much faster and safer than working to find a metallic contact point. Plus, voltage and current measurements can be made at the same time.
Not having to probe live conductors also makes jobs safer. Since there is no need to make electrical contact, the chance of human contact with an energized wire is greatly reduced. This also reduces the chance of making contact with the wrong conductor, which can produce unexpected results.
The Fluke T6-600/62MAX+/1AC also includes 1AC-A1-II VoltAlert Electrical Tester, 90-1000V AC, which is easy to use - just touch the tip to a terminal strip, outlet, or cord. When the tip glows red and the unit beeps, you know there is voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.
Country of Origin | Malaysia |
---|---|
Brand | Fluke |
Catalog | 4910400 |
Condition | NEW |
UPC | 095969854184 |
Vendor Alias | T6-600/62MAX+/1AC |
- 1 - Electrical Tester with FieldSense Technology, 600V (T6-600)
- 1 - Infrared Thermometer, -22-1202°F Range, 12:1 Ratio (62 MAX+)
- 1 - VoltAlert AC Voltage Tester, 90-1000V AC (1AC-A1-II)
- 2 - Attached Test Leads
- 3 - AA Batteries